Windows 10: Wifi problem on my PC

So I have been trying to fix this wifi problem with my PC, I have connected to my network before, however at certain times of the day random, it disconnects and I can't find the network in the list, I can see every other wifi in the neighbourhood, and important to note that none of the other devices in my household are affected by this, so it makes me think it is a problem with my device specifically, I've tried updating all drivers and doing many things advised with my settings etc, but none of It seems to work, someone please help.

:)

 

Wifi and browser problems with windows 10


I'll tell you how I fixed an identical problem on a ASUS laptop that had run perfectly on Windows 7 and ran well on W10 from January until the Anniversary update in early August. I tried everything I found on this forum and two others. Nothing worked. The last thing someone suggested was disabling the adapter and using a WiFi dongle. Problem continued. Nobody suggested changing the wireless network adapter. I bought and installed an Intel 7260 WiFi card and just used the driver which was downloaded on the reboot after the install. All problems solved!!

I must have wasted two months reading and trying everything. Even the manufacturer support inferred I needed a new machine though they sent me a Windows 8.1 driver to try, with the same result.

I'd suggest contacting the manufacturer to determine if they white list any cards and see if they have suggestions for a compatible card. They may want you to buy another laptop but if the cards aren't white listed, a simple card swap to one compatible with Windows 10 seems to be the answer.

 

Problems when sharing WiFi with the Virtual Adapter

For many years I have always shared Internet to my devices like phone and tablet with my PC's WiFi antenna through the Microsoft Wi-Fi Direct Virtual Adapter, I only use it for that, since I have a cable connection, and I start the wifi with the command NETSH WLAN start hostednetwork previously having done the settings of NETSH WLAN set hostednetwork mode=allow ssid="Wifi" key="password".

For my devices to connect it is necessary that the Virtual Adapter that is created with that command has access to the Internet, for this I have to share the Internet from my Ethernet adapter to the Virtual Wifi adapter.

For some time now (a couple of months) I've been experiencing problems when sharing the Internet through that medium. The problem is that when I start the WiFi my devices do not connect, they say "Getting IP address" and never connect.

I have found the solution and I have to do the following:

1. Disable the Virtual Adapter with the command netsh wlan stop hostednetwork.
2. Remove the connection sharing from the Ethernet Adapter.
3. Activate the Virtual Adapter with the command netsh wlan start hostednetwork.
4. Adding connection sharing from the Ethernet Adapter to the Virtual Adapter again.

By doing these steps my devices can now be connected to the Wifi, but sometimes it doesn't work if I do these steps too quickly. I have noticed that if I do step 3 and 4 too quickly it does not work and I have to repeat the process but doing these last two steps more slowly, until the Virtual Adapter gets an IP address 192.168.137.1 from Internet Protocol version 4

Also this problem does not occur 100% of the time. Sometimes when I run the command to start the Wifi everything happens fine and my devices connect well but this only works after my PC has been on for at least 5 minutes (I haven't counted it). If I run the command as soon as my PC has turned on then it doesn't work anymore.

As I mentioned before this problem didn't occur before because I had configured a .bat file that ran as soon as the PC was turned on with the NETSH WLAN start hostednetwork command and everything worked fine.

Now, I would like to go back to before when everything was fine so that when my PC starts up the WiFi too and I don't have to do all this protocol all the time, but with a simple command everything is solved.

Could someone give me a hand with this?

 

WiFi Connection Problem

Hello Claire,

For us to isolate the issue you are experiencing, kindly respond to the questions below:

• When did the issue started?
• Have you made any software or hardware changes to your device prior to the issue?

As a first troubleshooting step, we suggest that you run the Network troubleshooter. The Network troubleshooter can help diagnose and fix common connection problem. Here's how to run the troubleshooter:

• In the search box on the taskbar, type Network troubleshooter, and then select
  Identify and repair network problems from the list of results.
• Follow the steps in the troubleshooter and see if that resolves the problem.