Windows 10: Wifi problem - unable to connect to the network

My laptop is an asus laptop - TUF Gaming FX505DV_FX505DV. I don't know what else to do I tried absolutely every tutorial so that it doesn't disconnect from wifi anymore I took it to the repair shop they changed the thermal paste and cleaned it I really don't know what else to do wherever I let it connect it goes connected outside of where I am it connects to the internet and then disconnects and tells me that it can't connect to this network. I can connect any device to wifi and it works fine except that the laptop I don't know what it has and sometimes the wifi icon that shows me if there are

:)

 

Unable to see a specific WiFi Network in list

I have Windows 8.1. I can see the WiFi networks of everyone in the vicinity. However, am unable to see the WiFi network installed in my home.

The WiFi Network that am unable to see is a new connection. This new connection is seen by all devices (Mobiles etc) but it is.not getting displayed in my Windows 8.1 list.

I have seen other threads on the issue which recommend checking WLAN Autoconfig etc. And have tried those steps too. But there is no change in the outcome.

Can anyone please suggest any solution that migjt work. I am not willing to format my Laptop.

Any help would be deeply appreciated.

Thanks in adv and Regards

Rahul P Sharma

 

unable to connect to wifi network

Hi Alexander,

Reading through your post, we see that you have run a lot of troubleshooting steps to resolve your WiFi network connection issue. There ares some other steps though that you may still do to resolve it.

Please check Fix network connection issues in Windows 10.

To site some:

• On the first item about Things to try first, you will see basic troubleshooting steps. Included in this topic is a suggestion to contact your Internet Service Provider which will be able to guide you in checking connection with your router.
• Running the Network troubleshooter. This topic also includes applying network commands that may be able to help you. Please try the other network commands and check if it works.
• Uninstalling the network adapter driver and restart. You may try if you had a
  recent update.
• If you are running running Windows 10 Version 1607 or later you may also try
  Using network reset.

If you have tried all of the above and the connection still fails, you may try some other steps listed below:

• Change channel width for your network adapter.
  • Press Windows Key + S and enter type network. Chose
    Network and Sharing Center from the list of results.
  • When Network and Sharing Center opens, click the Change adapter settings.
  • Locate your wireless adapter and right click it. Choose Properties from the menu.
  • When Properties window opens, navigate to Advanced tab.
  • Select the 802.11 channel width and change the value. Some users have reported that changing the value to
    20 MHz has fixed the issue for them, but you might have to use a different value.
  • Click OK to save the changes.

• Disable IPv6 on your computer and router.
  • Open Network and Sharing Center.
  • Find the Connections section and click your current connection.
  • Connection status window will open. Click the Properties button.
  • Find Internet Protocol Version 6 (TCP /IPv6) and uncheck it.
  • Click OK button to save the changes.
  • Restart your computer in order to apply the changes.
  • If the problem still persists, you might have to disable IPv6 on your router. Disabling IPv6 on your router is a complicated process, and it’s different for every type of router, so before you do that, check the your router’s instruction manual.

• Make sure that your adapter and router are using the same security type.
  • Open Network and Sharing Center and click the Manage wireless networks.
  • Find your wireless network, right click it and choose Properties.
  • Go to Security tab, find Security type section and select the
    same security type that your router is using. You might have to try several different security types before you pick the right one.
  • lick OK to save changes.

• Add the connection manually.
  • Open Network and Sharing Center.
  • Click Set up a new connection or network.
  • Choose Manually connect to a wireless network and click
    Next.
  • Enter the requested information such as network name, security key and security type.
  • Click Next to finish the process.
  • After you’ve created a new network connection, everything should be working without any problems.
    
  • If the issue persists, try changing the security type of your new network.

Kindly keep us updated with the status of the issue

 

WiFi Connection Problem

Hello Claire,

For us to isolate the issue you are experiencing, kindly respond to the questions below:

• When did the issue started?
• Have you made any software or hardware changes to your device prior to the issue?

As a first troubleshooting step, we suggest that you run the Network troubleshooter. The Network troubleshooter can help diagnose and fix common connection problem. Here's how to run the troubleshooter:

• In the search box on the taskbar, type Network troubleshooter, and then select
  Identify and repair network problems from the list of results.
• Follow the steps in the troubleshooter and see if that resolves the problem.