Windows 10: WIN 10 20h2 Problems Boot DVD

Have a few problems with the upgrade to win10 20h2


1. Shut down takes 3.5 minutes

2. boot up roughly 2 minutes


did sfc/scannow


C:\WINDOWS\system32>DISM /Online /Cleanup-Image /CheckHealth

Deployment Image Servicing and Management tool Version: 10.0.19041.572 Image Version: 10.0.19042.572

No component store corruption detected. The operation completed successfully.



3. DVDR Optical Drive no longer writes

followed all the steps

uninstall reinstall reboot

tried several discs, keeps asking for media

Tried different CDROMS H20 computers give same message

:)

 

dvd missing in win 10

Hello Eddie,

Thank you for keeping us posted on the status of the issue. I would like to assist you further from here.

Refer to the below steps for you to help ascertain the exact issue in this situation.

Step 1

Open the Disk Management Console to find out if the drive has no drive letters assigned to it, as a result of which it is not detected. Follow the below steps.

• Right click on the Windows Start Button.
• Select Disk Management from the User Menu.
• Check for the DVD drives.
• Assign a drive letter for the DVD drive if it is not assigned any.

Step 2

Check if the DVD drive is detected from the
Device Manager and check if there is a yellow triangle next to it. Follow the below steps.

• Right click on the Windows Start Button.
• Select Device Manager from the User Menu.

Step 3

Check if the drive detected properly if you restart the computer ion Safe Mode.

Safe Mode With Networking:

Follow the steps to boot to Safe mode with networking:

• 
  Press the ‘Windows + R’ key on the keyboard.
  
• 
  In the ‘Run’ windows type ’MSCONFIG’ and click ‘Ok’.
  
• 
  Click the ‘Boot’ tab.
  
• 
  Under ‘Boot Options’, select the ‘Safe Boot’ option.
  
• 
  Choose the type of safe mode by selecting one of the options below the Safe boot check box: Select ‘Network’.
  
• 
  Click OK and then restart your PC.
  

Step 4

Access the BIOS of the computer and check if the DVD drive is detected. If it doesn't, then Windows will not be able to detect the same.

Note: Refer to the manufacturer's manual and check for further information on how to access BIOS settings.

As a troubleshooting step, I would suggest you to follow these steps to deploy the
Windows in built troubleshooter:

a) Write Troubleshooting in the search box and hit enter.

b) Click on Troubleshooting
tab.

c) Click on view all option on the upper left corner.

d) Select the Hardware and Device
option from the list.

e) Click Next to run the Hardware and Device
Troubleshooter.

Additionally, also refer to the below link on
Your CD or DVD drive is not recognized by Windows or other programs
and check if it helps.

https://support.microsoft.com/en-us/kb/314060

Note: Also applies to Windows 10

Hope the above information was helpful. If you need further information, feel free to write to us and we would be happy to help you.

Thank You

 

P55A UD3 Problem Booting DVD Drive

You went to bios and selected the dvd drive as first boot up ?) cd-rom doesn't cut it, has to be that exact drive from the list.

 

Win 10 boots...

I can't answer to the speed of Win-8 booting. I tried the Win-8 preview and went back to Win-7 after a month. They say that Win-8.1 is a lot better than Win-8 was.
My Win-10 TP is working well ATM.