Windows 10: win 10 - bsod wih reboot - DRVPOWERSTATE_SUBCODE: 4

Hi --I could use some assistance with determining why a computer BSODs with reboot. I have the dmp file but need assistance to proceed. Thank you!

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

Win 10 BSOD after reducing number of CPUs

• Win 10 x64 running in VMware Fusion VM on MacBook Pro w/ 6 physical cores & HT.
• When VM is configured with 5+ CPUs, Windows runs fine.
• When VM is configured with 4 or fewer, BSOD INVALID SYSTEM CONFIG INFO
  • WINLOAD.EFI missing or corrupted
  • Attempt to repair using ISO image fails

OS X 10.15.4, VMware Fusion Pro 11.5.3

Win 10 Enterprise

Version 1703

Build 15063.2108

Any suggestions appreciated, as I need to move this VM to another HW config with fewer physical CPUs.

Thanks!

 

Windows 10 Samsung Note 4 USB connection

Hi Terrence,

To help you out with your concern, here are some information that we need to know:

• Can you tell us what model of computer you are using while connecting to your Samsung Note 4?

However, we suggest you to run the Hardware and Device Troubleshooter through these steps:

• Press Win + X then select Control Panel.
• Click Troubleshooting.
• Click Hardware and Sound then select Hardware and Devices.
• To run the troubleshooter, follow the steps from the wizard.

You may also try updating the driver by following the steps on this
link.

Let us know if you need further help.

Thanks.