Windows 10: win 11 installation with flash usb getting error at second line of copying files with...

In win 11 installation, I downloaded win11 iso and prepared bootable usb using rfus application and copied the is files by mount to the usb3 harddisk partition aslo. Now I kept bootable usb flash and started clean install, I formated the old win11 patition and select next in istallation, the copy of files first line comleted sucessfully, after installing features in second line the copy of files at around 80% failed with error window and borted installation and diplayed fresh start of installation window.At this time I removed flash usb and placed usb3 harddiskwhich had iso mount files and f

:)

 

Fresh USB Windows 10 Install - Failing

I am trying to install a fresh copy (reformatted the hard disk) of windows 10 using a USB

• Created an installation media on a USB flash drive (Win 10 pro) from this page https://www.microsoft.com/en-us/software-download/windows10
• Changed the boot order on the other PC so that it boots using USB
• Selected custom install
• Installing Windows goes through the following steps successfully: Copying Windows Files, Getting Files ready for installation, Installing features, Installing updates and before the last step (Finishing up), it restarts
• Then it goes back to the start of the installation steps

I am stuck and have read numerous posts but don't know what to do to install a fresh copy of Win 10.

 

5870 Not Flashing

I had the exact same error and this is how i fixed it
--------------------------------------------------------------------------------

If you have been suffering messages such as 'Adapter not Found' , 'ERROR 0FL01' , 'Invalid Adapter or BIOS Selected' when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you've been looking for.

--------------
Required Files
--------------
*HP USB Disk Storage Format Tool
http://h20000.www2.hp.com/bizsupport...reg_R1002_USEN
--------------
*USB Boot Files
http://www.4shared.com/file/43544416...FILES.html?s=1
--------------
*ATIFlash
http://www.techpowerup.com/downloads...sh 3.79.html
--------------
*Your Video Cards Bios
http://www.techpowerup.com/vgabios/i...ace=&memSize=0

------
Part 1
------
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool

Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)

Step 3 Copy ATIFlash files USB Boot Drive

Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
------
Part 2
------
Step 1 Boot into 'Safe Mode' (by pressing f8 before booting into Windows)

Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager 'Display Adapters' and Uninstall (including Software when prompted)

Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
------
Part 3
------
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)

Step 2 Reboot into your Mobo's Bios

Step 3 Once in your Mobo's Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot

Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist

Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can't be flashed until unlocked

Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed

Step 7 Once your Bios has been flashed simply 'Ctrl+Alt+Delete' to restart your PC

Step 8 Go straight back into your Mobo's Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
------

 

Copying movie to Flash Drive

Hi Todd,

One way on how to save and move files to a flash drive is by using the File Explorer in Windows 10. To assist you with your concern, to save your movie file to a flash drive, we suggest that you follow these steps:

• Connect your USB flash drive to your PC.
• Navigate to the folder or location where you save your movie files.
• Right-click on the movie file and select
  Copy.
• Right-click on the Start menu, and select
  File Explorer.
• On the left-pane, double-click on This PC.
• Double-click on the drive letter that correspond to your USB flash drive.
• Right-click and select Paste.
• Wait for the process to complete the transfer.
• Once you’re done, you can safely remove your USB flash drive.

Let us know if the solution above works for you.