Windows 10: win10 has rebooted from a bugcheck. endless!

I'm using Lenovo docking station with my HP440G5 but recently it keeps rebooting and logs as follows:


The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a 0x0000000000000020, 0x0000000000000002, 0x0000000000000000, 0xfffff80168e26071. A dump was saved in: C:\windows\MEMORY.DMP. Report Id: 2e27d419-c6fb-4420-9511-02192ce1806b.


I checked the dump file and it says below.

Any advice or suggestion would be highly appreciated!!!



RQL_NOT_LESS_OR_EQUAL aAn attempt was made to access a pageable or completely invalid address at aninterrupt request level IRQL that is too high. This is usuallycaused by drivers using improper addresses.If a kernel debugger is available get the stack backtrace.Arguments:Arg1: 0000000000000020, memory referencedArg2: 0000000000000002, IRQLArg3: 0000000000000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation only on chips which support this level of statusArg4: fffff80168e26071, address which referenced memoryDebugging Details:------------------KEY_VALUES_STRING: 1 Key : Analysis.CPU.mSec Value: 2983 Key : Analysis.DebugAnalysisProvider.CPP Value: Create: 8007007e on HP440G5-06 Key : Analysis.DebugData Value: CreateObject Key : Analysis.DebugModel Value: CreateObject Key : Analysis.Elapsed.mSec Value: 3039 Key : Analysis.Memory.CommitPeak.Mb Value: 142 Key : Analysis.System Value: CreateObject Key : WER.OS.Branch Value: vb_release Key : WER.OS.Timestamp Value: 2019-12-06T14:06:00Z Key : WER.OS.Version Value: 10.0.19041.1ADDITIONAL_XML: 1OS_BUILD_LAYERS: 1BUGCHECK_CODE: aBUGCHECK_P1: 20BUGCHECK_P2: 2BUGCHECK_P3: 0BUGCHECK_P4: fffff80168e26071READ_ADDRESS: 0000000000000020 BLACKBOXBSD: 1 !blackboxbsdBLACKBOXNTFS: 1 !blackboxntfsBLACKBOXPNP: 1 !blackboxpnpBLACKBOXWINLOGON: 1PROCESS_NAME: SystemTRAP_FRAME: ffffcb8316e3f800 -- .trap 0xffffcb8316e3f800NOTE: The trap frame does not contain all registers.Some register values may be zeroed or incorrect.rax=0000000000000000 rbx=0000000000000000 rcx=ffffbb84c72f2040rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000rip=fffff80168e26071 rsp=ffffcb8316e3f990 rbp=0000000000000002 r8=000000000000000f r9=0000000000000000 r10=0000000000000000r11=0000000000000000 r12=0000000000000000 r13=0000000000000000r14=0000000000000000 r15=0000000000000000iopl=0 nv up ei pl zr na po ncnt!KiBeginThreadWait+0x51:fffff801`68e26071 65488b342520000000 mov rsi,qword ptr gs:[20h] gs:00000000`00000020=????????????????Resetting default scopeSTACK_TEXT: ffffcb83`16e3f6b8 fffff801`69007769 : 00000000`0000000a 00000000`00000020 00000000`00000002 00000000`00000000 : nt!KeBugCheckExffffcb83`16e3f6c0 fffff801`69003a69 : 00000000`00000002 ffff8781`414e9180 ffffbb84`c72f2040 fffff801`68e64d7f : nt!KiBugCheckDispatch+0x69ffffcb83`16e3f800 fffff801`68e26071 : 00000000`ffffffff 00000000`00000000 00000000`00000001 fffff801`698248c8 : nt!KiPageFault+0x469ffffcb83`16e3f990 fffff801`68e25c53 : ffffbb84`c72f2040 ffffbb84`00000000 ffffcb83`0000000f 00000000`00000000 : nt!KiBeginThreadWait+0x51ffffcb83`16e3f9f0 fffff801`68e25910 : ffffbb84`c72f2040 fffff801`692715a0 ffffbb84`af513b30 ffffbb84`00000000 : nt!KeRemovePriQueue+0x93ffffcb83`16e3fa70 fffff801`68f17e25 : ffffbb84`c72f2040 00000000`00000080 ffffbb84`af47b040 000fa4ef`bd9bbfff : nt!ExpWorkerThread+0xa0ffffcb83`16e3fb10 fffff801`68ffcdd8 : fffff801`63667180 ffffbb84`c72f2040 fffff801`68f17dd0 00000000`00000000 : nt!PspSystemThreadStartup+0x55ffffcb83`16e3fb60 00000000`00000000 : ffffcb83`16e40000 ffffcb83`16e39000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x28SYMBOL_NAME: nt!KiBeginThreadWait+51MODULE_NAME: ntIMAGE_NAME: ntkrnlmp.exeSTACK_COMMAND: .thread ; .cxr ; kbBUCKET_ID_FUNC_OFFSET: 51FAILURE_BUCKET_ID: AV_nt!KiBeginThreadWaitOS_VERSION: 10.0.19041.1BUILDLAB_STR: vb_releaseOSPLATFORM_TYPE: x64OSNAME: Windows 10FAILURE_ID_HASH: {7a06eea9-9e8a-c9ed-d500-71a08b4c59fd}Followup: MachineOwner---------

:)

 

Windows 10 endless loop reboot

Hi,

• Have you checked if the hard disk is set as first boot device in the BIOS?
• Which version of Windows is installed on the computer?
• What did the HP supported suggested you to fix the issue?

I suggest you to follow the steps provided in the following article and check if it helps.

Windows 10 endless loop reboot

If the issue persists, please get back to us with the more information about the interaction with HP support and the outcome of the issue.

 

The computer has rebooted from a bugcheck

I get the error: The computer has rebooted from a bugcheck. My computer keeps rebooting. What are the steps?

 

System Reboot for Bugcheck 0x00000124


Hi Guys,

I recently purchased a MSI laptop (GT72VR 6RE), and upgraded Win 10 version from Home to Pro. Performed the upgrade as soon as I fired up the laptop for the first time.

Last couple of weeks, while working on Google Drive (via Chrome) the computer will suddently lock up, and after couple of seconds reboot.

Checking Event Viewer, it shows the following events:



Details for the listed events in sequence:

• The previous system shutdown at 4:48:27 PM on ‎5/‎09/‎2016 was unexpected.
• The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
• Audit events have been dropped by the transport. 0
• The driver \Driver\WUDFRd failed to load for the device ACPI\ENE0110\5&14353508&0.
• A corrected hardware error has occurred.
  
  
• A corrected hardware error has occurred. (same as above)
• The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xffffe0002c0c2028, 0x00000000be000000, 0x0000000000800400).

It has happened twice so far and that has me bit worried.
Previous one had the following bugcheck error:

• The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff800765cd8b8, 0x0000000000000000, 0x00000000000000a0).

Would really appreciate if someone can point out anything.

It is a brand new laptop (couple of weeks old). And both the times when it crashed, I was using Chrome (google drive, or writing email etc), wasn't playing games. The CPU/GPU isn't overclocked either.

Thanks in advance.