Windows 10: Win10 Install Stuck on logo with no spinning dots

Hi all, I'm trying to install Windows 10 from a bootable USB onto my new parts, but it just stays at the Windows logo with no spinning dots. I have left it overnight like this but it has remained on the same screen.

I have used Media Creation Tool and my USB drive is configured for FAT32. I have tried the memory test from the USB stick because I clicked "download both" when creating the media. I have also tried the USB stick on another PC and the installer works just fine. My PC posts just fine and all my devices are detected. I have reset all bios settings to normal and am running it on UEFI.

Would appreciate any help! My specs are as listed below.

Ryzen 5 5600X Asrock B550M Pro4 Samsung PM830 128gb Toshiba P300 1TB Corsair Vengeance LPX 3000mhz 16gb

submitted by /u/hoooooooooon
[link] [comments]

:)

 

Windows 10 installation stuck at blue logo(no spinning dots)


All,

I downloaded windows 10 ISO(I purchased it) file and created bootable DVD and USB using Rufus. I want to install windows 10 in one of the system which had corrupted windows 7 in SSD(No data or nothing is required)

My system config is below
Intel i5(4th gen)
Gigabyte H87 D3H(which has UEFI) and flashed to version 9
Nvidia 9400 GT(driver not updated but the site listing says it is compatible with win 10)
8GB RAM
SSD(60 GB, which has corrupted win 7)
HDD(500 GB)

Believe I have the minimum system requirement to install Windows 10?
After selecting cd/dvd/usb, windows 10 logo appears(without any spinning dots, just plain logo) and get stuck there. I waited for 1-2 hour but nothing happened. I searched and some of them have suggested to remove components and keep only bare minimum. So I tried removing GFX card and the HDD, and kept only SSD(default changed to IGFX). But even then it doesnt move forward from the windows logo screen.
Please someone suggest, how to move this installation further? Any debugging options? Anything I am missing here? I purchased it and hence I dont want to waste the money I spent on it.
I checked in BIOS and I can confirm that Fast boot is disabled or Data Execution Prevention and/or similar options are enabled.
Note:I havent used media creation tool here


To confim whether my bootable DVD/USB had some errors in initiating setup, I tried running setup.exe within my friends machine(win 7) and it is launching and giving me screens to download updates and/or to enter product key. Images attached which gives indication that setup is launching.
But when I try to run the setup as bootable DVD/USB I get the blue logo screen and nothing happens.(even no spinning dots below logo and/or errors to share) Refer Image - Win10_Bootable_DVD.jpg

Any help is appreciated to move this forward.

Thanks
Guhan

 

Windows 10 stuck at Black Screen with Blue Windows Logo no spinning dots

Windows 10 stuck at Black Screen with Blue Windows Logo no spinning dots

 

windows 10 install stuck on windows logo/spinning dots

I just bought computer parts and after start to install windows, it stuck on the windows logo after that spinning dots Rotated about two times.

I changed my DVD three times and even tried windows 8 and 7 and USB installation.

I had four ram and tried them one by one

I unplugged all of the parts and only connect motherboard, CPU, ram, and weird keyboard to see if it goes to the next step and ask for the HDD.

Also, it's on UFEI mode.

Motherboard: gigabyte h370 aorus gaming 3 wifi

CPU: i7 9700k

Ram: G.skill and corsair

I will appreciate if someone can help me with that.