Windows 10: WIN11 Pc black screen after restart

Recently I tried fixing an issue in which windows display settings thought I was using 2 monitors even though I am only using one I didn't mess around with the settings very much and decided just to leave it alone. I wanted to confirm again if two devices were showing up as monitors in device manager so I checked that. However I tried to open the properties menu and nothing happened I tried multiple times and still nothing happened. I just tried to close the application and it started making some alert noise. I gave up and decided to restart my pc it made an alert noise again and there was no

:)

 

My Win11 PC boots into a black screen

Hi everyone,

I'm having trouble with my Lenovo Ideapad Duet 5i running Win11. All of a sudden, it no longer boots into Windows with any display -- only a black screen. On startup, I can see the manufacturer's logo, but then it all goes black... although I can hear windows booting up. So far, I've tried:

1) hard restart

2) checked to ensure the screen was not turned off using the extend/duplicate screen option

3) tried booting to safe mode

4) system restore from startup recovery console

5) full format/reinstall of windows from the startup recovery console.

None of these have worked. Are there any other steps I can take?

 

Black screen after Windows update.

Hi Crystel,

Thank you for writing to Microsoft Community Forums.

• Were you able to get to the desktop screen after you restarted the system?
  
• When the screen was blank, were you able to see the cursor on the screen?
  
• Did you get any error code or error message?
  

Please get back to us with answers to above questions, for us to suggest the appropriate troubleshooting steps.

Meanwhile, I suggest to try the steps mentioned in the article below and let us know if it helps.

Troubleshoot black screen or blank screen errors

We look forward for your reply.

Thanks,

Peer Samie

Microsoft Community-Moderator

 

Windows 10 infinite restart black screen


Black screen after sign-in and you can see a mouse cursor:


Unplug your external devices

When you are at the black screen, try unplugging any peripherals you have plugged in at the time, and wait for a moment. If your screen becomes visible again, plug the peripherals back in one at a time.

Use Safe Mode

If unplugging peripherals not resolve the issue, for each of the troubleshooting steps below, you will need to use Safe Mode to troubleshoot this issue. To enter Safe Mode:

1. Reboot the PC, and when you reach the sign-in screen, hold the Shift key down while you click the Power button and select Restart.
2. When the system reboots, you will enter the Windows Recovery Environment.Select Troubleshoot, and then Advanced options, then Startup Settings, and Restart. When it restarts, you should see a number of options. Press 5 or F5 for Safe Mode with networking.

Reinstall your graphics card driver:

1. Once you’ve entered Safe Mode, right-click the Start icon and select Device Manager.
2. Expand Display Adapter.
3. Right-click your display adapter and select Uninstall. Then reboot your PC.

Check the registry

You may also see a black screen after signing in if the user interface has been replaced with software that is incompatible with Windows 10. You can check this in the registry. Warning: This solution will modify the registry. Serious problems might occur if you modify the registry incorrectly. Prior to attempting these steps, you should backup the registry for restoration in case problems occur.

1. Once you’ve entered Safe Mode, right-click the Start icon and select Run.
2. Type regedit.exe into the Open text box and click OK.
3. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
4. Click to select the WinLogon key, and then, in the right pane, click Shell. The value of Shell in the Data column should be explorer.exe. If the value of Shell isn't explorer.exe, double-click Shell, and then, in the Value data text field, enter explorer.exe, and then click OK.
5. Close the Registry Editor and then restart your PC.
   
   

Check for a corrupted user account

There could be a problem with the user account. To test this, create a new administrator user account and check if the new account also boots to a black screen:

1. Once you’ve entered Safe Mode, right-click the Start icon and select Command Prompt (Admin).
2. In the Command Prompt window, type the following commands (changing “<password>” to something of your choice):
   
   net user test <password> /add
   net localgroup Administrators test /add

Provided by: Sharath Srinivasa, Microsoft Forum Moderator.

See if any of this works for you,
John