Windows 10: Window 11 keep restarting or BSOD IRQL_NOT_LESS_OR_EQUAL a

HiI did a clean install for window 11 a week ago just because I want to get rid of all BSOD...Mission failed. BSOD not showing up as frequent but the computer will restart without a BSOD.Did DISM/ SFC scan/ Disk error checkingTried to run memory diagnostic but the computer will give me a black screen for hour without telling me anything.Below is the Bugcheck Analysis .Please help me....IRQL_NOT_LESS_OR_EQUAL aAn attempt was made to access a pageable or completely invalid address at aninterrupt request level IRQL that is too high. This is usuallycaused by drivers using improper add

:)

 

IRQL_Not_Less_Or_Equal

sigh
If your computer auto restarts on BSOD find the setting in windows to make it stop.
Second step is to look for the error code of the BSOD.
Perhaps easier would be to use an online application such as bluescreen viewer.
Once you know which driver is causing the problem you can look further into fixing it.

 

BSOD problems IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA

Some days when I turn off my PC it happens sequentially these 3 BSOD (IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA). Not necessarily in this order. But the errors are basically one of these.

• I've already done memtest86 and got no errors
  
• SFC /scannow with no errors too
  
• checkdisk with no errors
  

I've checked the error with BlueScreenView and the problem is with the driver ntoskrnl.exe.

Any suggestion of whats going on?

 

Bsod "irql_not_less_or_equal"

This most probably is due to a faulty charger or a battery.

Generate Battery Usage Report in Windows 10

But there are other common causes of it:

• Incompatible Drivers
• Malfunctioning hardware
• Registry Issues
• Malware attacks
• Incomplete driver installation

To solve the problem, you could try using the following common methods:
Method 1: Use SFC and DISM
Step 1: Press Windows + X and then select Command Prompt (Admin) from the menu.
Step 2: Type in the following command and then press Enter.
sfc/scannow
Step 3: Wait for the process to finish and it will show you results. If Windows can repair your files, it should say that the corrupted files are repaired. If the process is stuck, the Windows could well fail to recover itself. You will have to use the DISM tool to repair your Windows sinceit’s a more efficient and powerful tool than SFC, use these steps:
Step 4ress Windows Key + X and then click on Command Prompt (Admin).
Step 5: Now type the following command and then press Enter.
DISM /Online /Cleanup-Image /RestoreHealth

Method 2: Update Your Graphics Drivers
Step 1: Press Windows Key + R to open the Run box.
Step 2: Type in devmgmt.msc and press Enter to open the Device Manager
Step 3: Expand the Display Adapters category.
Step 4: Right-click on your graphics device, and then select Update Driver.
Step 5: Select the Search automatically for updated driver software option.
Step 6: The computer will search for drivers online and install them.

Method 3: Check Your Memory and Hardware
If the IRQL_NOT_LESS_OR_EQUAL error is not related to the software, then some hardware glitches might be causing the issue. In such a scenario, you should try testing the RAM of your device. Fortunately, Windows offers a utility tool called memory diagnostics. Refer to the following instructions to learn how to access the utility tool.

Step 1: Press Win + Q to open the search box, enter Memory Diagnostic to open the Windows Diagnostic utility.
Step 2: Select the Restart now and check for problems option to scan the RAM.

Reference: [Solved]: IRQL_NOT_LESS_OR_EQUAL Error in Windows - Bitwarsoft