Windows 10: Windows 10/11 Installation Issue on NVMe SSD – Systematic Failure Despite All Attempts

Hello everyone,I'm reaching out after several days of unsuccessful attempts to reinstall Windows 10 or 11 on my Dell Inspiron 5570 laptop with an Intel Core i5-8250U, 16GB of RAM, 1TB SATA SSD + 256GB NVMe SSD. I'm running out of ideas and hope someone can help. ContextMy PC had been running a dual-boot setup with Ubuntu + Windows 11 version 22H2 for a long time, and everything was working perfectly.However, Windows could no longer update or reset errors related to the recovery partition since around December.So, I wanted to cleanly reinstall Windows 11 on the NVMe SSD, where it had

:)

 

Upgrade Windows 7 on SSD NVMe to Windows 10 on SSD NVMe

Hi Varnium,

Thanks for updating me.

Usually, you can install Windows 10 on SSD NVme directly if your computer BIOS detects it.

You can try the following steps if your computer detects the SSD NVme:

1-After creating a Windows 10 bootable USB and going through the installation process. From the Installation page "Install Now", press F10 to open the Command Prompt.

2-Type these commands and hit enter:

diskpart

list disk

select disk X (Replace X with your SSD NVme number shown in the list above)

clean

3-Restart your computer and go through the installation process.

If your computer does not detect it or the BIOS detects it, but you cannot see it during the installation process, it is best to contact your computer manufacturer's support services to provide you with accurate information about configuring BIOS.

Here are similar cases:

https://eu.alienwarearena.com/ucf/show/261122/b...

https://daily.slickdeals.net/tech/how-to-instal...

https://www.dell.com/support/kbdoc/en-ae/000132...

Note: Make sure you can find all Windows 10 compatible drivers for your computer from manufacturer's official website and your computer fully supports Windows 10 before taking further actions.

Please do not hesitate to ask if you need further assistance.

____________________________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

 

960 NVMe SSd abysmally Slow now despite all attempts to correct.

Here's your answer. You are only going to get one half the speed due to your interface.
It's only capable of two lanes instead of four.

 

Windows 10 installer don't detect NVMe drive

I have 2 drives:

• disk1 (SATA SSD, with Ubuntu 16.04)
  • partition1 (sda1: flag /boot)
  • partition2 (sda2: flag /home, encrypted by LUKS)
• disk2 (NVMe SSD)

So, the goal is to install Windows 10 on disk2 and boot it from GRUB (which is on sda1).

What is the problem ?

In disk-choose step, disk2 is missing. However Ubuntu 14.04 installer "see" this disk, so I assume that is software issue, rather than my hardware.

What I tried to solve this problem ?

• loaded Samsung NVMe drivers from this thread
• patched Windows image using DISM tool by adding 2 updates. I followed this guide
• tried to run Windows 10 installed on USB stick to install it

All of them failed.

Please help me to solve this issue.