Windows 10: Windows 10 BSOD Errors Round two, thought I fixed it, guess not. If anyone can help I'd...

Thought I fixed it, but got some more errors the past couple days. It always seems to be the ntoskrnl.exe issue,
I did do a memx86 and my ram showed no issues. As far as I know my drivers have been up to date, I will enclose both microsoft drivers and non microsoft drivers, as well as a link to my error messages via one drive.

I apologize for the immense post, this time I dumped all the information and then some in hopes of fixing this gaming pc once and for all

https://1drv.ms/u/s!Av5kJaPJTGZ0s2_l8jXE3E8MXpmu?e=APs6cE

Link to original post here
https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-bsod-errors-brand-new-computer/a4677977-ee71-4192-89c9-eba293754fe8?tm=1613428590026


Speccy: http://speccy.piriform.com/results/ZcvW7kPjvuQ64ZtPuDOKzBG
On Mon 3/1/2021 6:18:54 AM your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe nt!memset+0x15D81
Bugcheck code: 0x50 0xFFFF8303B4010340, 0x11, 0xFFFF8303B4010340, 0x2
Error: PAGE_FAULT_IN_NONPAGED_AREA
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

6:19 am The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 0xffff8303b4010340, 0x0000000000000011, 0xffff8303b4010340, 0x0000000000000002. A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: aac1d5b2-39f9-410a-b223-9b5a298e17db.
System
-Provider
[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {b675ec37-bdb6-4648-bc92-f3fdc74d3ca2}
EventID2
Version0
Level2
Task2
Opcode12
Keywords0x8000000000000010
-TimeCreated
[ SystemTime] 2021-03-01T12:20:08.3511621Z
EventRecordID284
Correlation
-Execution
[ ProcessID] 12928
[ ThreadID] 16652
ChannelMicrosoft-Windows-Kernel-EventTracing/Admin
ComputerDESKTOP-71KDLGM
-Security
[ UserID] S-1-5-21-2660446636-2461418296-566028531-1001
-EventData
SessionNameOWEtKernelLogger
FileName
ErrorCode3221225506
LoggingMode4194560
On Sun 2/28/2021 3:55:45 PM your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\022821-7937-01.dmp
This was probably caused by the following module: ntoskrnl.exe nt+0x3F5C20
Bugcheck code: 0xA 0xFFFFF8061CD629F0, 0xFF, 0xD8, 0xFFFFF8061CC70714
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug.
This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Thu 2/25/2021 3:01:00 PM your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\022521-8109-01.dmp
This was probably caused by the following module: ntoskrnl.exe nt+0x3F5A80
Bugcheck code: 0x1 0x77521CFC, 0x0, 0xFFFF, 0xFFFFEB0B6E228B80
Error: APC_INDEX_MISMATCH
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that there has been a mismatch in the APC state index.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

:)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

BSOD issue after fixing another BSOD error

Hi Williams,

There are several reasons why BSOD occur, which has different resolution. To check for any corruption or the integrity of your computer's Windows, we suggest that you perform a
Check Disk by following these steps:

• Type cmd in the search bar.
• Right-click on the Command Prompt, then Run as administrator.
  
• Type chkdsk x: /r, the /r command will fix errors found on the disk.

Let us know if you need further assistance.

 

Windows 10 BSOD Errors to Come with Troubleshooting QR-Codes

M$ helping computer repair technicians to earn their bread and butter.*Stick Out Tongue