Windows 10: Windows 10 cannot boot. Preparing automatic repairs and cursor

I think i installed some malware and wanted to do a clean reset and install windows 10. But when starting my computer it got stuck on the win logo with the cirlces for an hour and more so I tried to enter recovery mode by doing the off and on for 2 times but it did not even work. The most that happened was 'preapring automatic repairs' but then it got stuck on a black screen for 30 mins and afterwards the cursor appeared. I tried going intk safe mode but it can't get past the win 10 loading screen no Matter what i tried.

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

Windows 10 - Automatic Repair - boots in 2nd cycle

Hello. This is similiar topic on our forum but now i will explain more brighter.
So last time after i change in my UEFI boot priority from :"UEFI USB KINGSTON" to "P1 SSD SAMSUNG EVO 250 GB" i am getting weird booting problem with Windows 10.







When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click restart then Windows 10 boot fine. So i am needing 2 boots to boot properly to windows.

My disk is on MBR partirion. Is this related to my UEFI/Partitions?



Somebody said to me this:"UEFI booting requires a GPT disk. This is why Windows has to fix itself and only boots in 2nd cycle - as you keep trying to boot UEFI to an MBR disk."



Also i know that UEFI firmware can emulate BIOS functionality (CSM/Legacy) and work with MBR disks just fine. Or i am wrong? And cause is elsewhere?



I am a little confused. Thx for reply. My ssd Samsung Evo 250 GB , rams 2x8gb DDR3 Kingston Hyperx 1600mhz.

 

HAL_INITIALIZATION_FAILED and Preparing Automatic Repair loop


Hello Les,

Have you checked other threads on these forums to see if there are any suggestions you can try.

Here's one to try: Windows 10 preparing automatic repair loop