Windows 10: Windows 10 computers network sharing only working one-way

I've reached the point of exhaustion with how-to's and other advice on sharing. I have Win10 installed/updated on two laptops. On the home wifi network, one HP model =17 shows all 4 computers on the net, but the other Lenovo P17 shows all but the HP. So the HP will show the Lenovo, but not vice-versa.Both have Win10 Build 19044, but the HP is "Home" and the Lenovo is "Pro."Tried: https://answers.microsoft.com/en-us/windows/forum/all/how-to-setup-a-home-network-in-windows-10/f4c89acd-1d1d-4044-9efb-fe4475cdbe9dhttps://support.microsoft.com/en-us/windows/file-sharing-over-a-network-in-

:)

 

Computers Vanished From File Explorer But Network Still Works

I agree with @Try3. I have tried every suggested method to fix Windows networking suggested on these forums. All at best only worked for a short time. The only things that helped was:

1. Batch file I suggested in an earlier post
2. Creating shortcuts to computers on my home network

Note these two things are not fixes but workaround. However, at least they help and have never failed.

I have shortcuts set up for eight computers on my home network. I have created a folder on my desktop called My Network to hold the shortcuts. They have a mix of the following operating systems:

• Windows 10 - 4
• Windows 7 - 3
• Windows XP - 1

 

transfer files between computers on a home network

I don't know why this is so hard to do but I would like to transfer files between a desktop PC running windows 10 pro and a laptop running windows 10 home. I would like to transfer files in both directions. Both computers are on the same home network and are connected wirelessly.

Could some one provide either specific step by step instructions on how to do this (I googled and found a countless list of instructions that don't work)

or a link to a reference.

Thanks,

I don't know if this is possible but it would be nice to see the computer sending the desired file in the explorer file manager of the computer receiving the desired file and then under the computer see a list
of shared files and folders.

Again, this seems like such a reasonable way of sharing files and folders. Shouldn't there be a simple way to do this?

 

Unable to share network computers

Blake,

I disagree with Clint.

Here is my full list of network setting up steps. It is what I do to set up my own networks.

1 Set the same WorkGroup name on each computer - Change Workgroup - TenForumsTutorials

2 Create a local Admin account on each computer with both the same username and the same password.
- This will be used to authorise mutual network access upon the first connection to it but does not restrict which user accounts can subsequently be used when accessing the network.Add Local Account - TenForumsTutorials
Change Account Type - TenForumsTutorials- This can actually be an MSAccount but a local one is normally less prone to errors.
- Anyway, it's always a good idea to have a spare, password-protected local Admin account as a hedge against possible user profile corruption in the future.

3 Set up all Control Panel, Network and Sharing Center, Advanced sharing settings - includingTurn On Network Discovery - TenForumsTutorials
Turn On File and Printer Sharing - TenForumsTutorials
Turn On Password Protected Sharing - TenForumsTutorials - this step is what deals with the issue that Clint raised.
4 Share the desired folders - Share Files and Folders Over a Network - TenForumsTutorials In brief,- In File explorer, right-click on the folder, Properties, Sharing tab, Advanced sharing
- Set the checkbox for Share this folder
- Give it a Share name
- Click on Permissions,
- Everyone - Set Full control, Change or Read as desired
5 If a network includes earlier Windows versions, non-Windows computers or a network drive connected to the router then I understand SMB1 needs to be set up but this is not a topic I know about - Enable SMB1 File Sharing Protocol - TenForumsTutorials

6 Connect each computer to the router's network and set it up as a Private network - Set Network Location to Private - TenForumsTutorials- This connection step assumes use of Windows defender. If you use different security software then you should check if it requires any additional steps, such as manually approving use of specific network adapters, but I imagine they are all pretty decently automated these days and would at least tell you if they were rejecting a network / network adapter.
7 Access the shared drives both ways between each pair of computers & provide network credentials- The first time you do this you will need to enter the common local Admin account username and common password {the one set up on each computer at step 2 above}
- Set the Remember my credentials checkbox so that you are never required to do this again


- You will be able to access the shared drives using all other user accounts not just the Admin account used to set it all up.

Denis