Windows 10: Windows 10 Different BSOD Error

HI recently i assembled a computer with 5600x and rog b550 f an some times when windows login page come up i get bsods likeSYSTEM_SERVICE_EXCEPTION CRITICAL_PROCESS_DIEDand next time it get fix i buy new rams i use sfx code they not work and still some times it happens this is my dmp file :https://www.filemail.com/d/ctmodtrsksciurvthanks

:)

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

BSOD during gaming, plethora of different error codes!

Hello and welcome to TenForums

The log files that you provided only show one crash dump file so there is not a lot of information to go on. Furthermore the bugcheck code is not one I have ever seen before!

The stack recorded in the dump includes some references to storage and the analysis suggests memory corruption and so with nothing else to go on I would suggest that you do a check on the hard disk and RAM. This maybe the same as you have already run but it would be good to see the results.

Try CHKDSK
using option 3
Then



Diagnostics Test [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful.