Windows 10: Windows 10 EXT2/3/4 support - PROBLEMS

Hi all,

I work for a company that supplies mobile CCTV systems to the UK haulage industry. Our DVR recorders are Linux-based and require the 2.5" HDD to be formatted to EXT3 in order to record data. This of course poses an issue in connecting the same HDD to a Windows-based machine. In the past it has never really been an issue as we have used either EXT2FSD or a similar program to enable read/write to the drive. But recently we have had a lot of complaints about the process no longer working (normally just ensure EXT2FSD is running, connect the HDD to the PC via SATA >USB adaptor and it will appear as a normal external drive).

For some reason we can now connect the HDD to the PC without starting EXT2FSD first, but there is severe lag or crashes when opening folders etc, and writing or reading is all-but impossible due to crashes and very long pauses. So my question is this: have Microsoft added support for EXT2/3/4 file systems in an update recently? And if so, it seems to be broken! Even with EXT2FSD running in the background the same problem occurs. I am running Win10Pro, version 10.0.18362. Given the multitude of issues being reported with recent Win10 builds I would not be surprised!

I have a laptop running an older build (10.0.10586) and this has no issues whatsoever, which leads me to believe it must be something to do with the version that is causing the issue. Has anyone else experienced this? It is a major issue for us as most of our customers are also on 10 and the complaints are stacking up, with me having no idea what is going on! If anyone has any knowledge or advice it would be gratefully received. Thanks in advance everyone.



:)

 

Unlocked Realtek HD Audio Drivers Windows 7 & 8 (With Dolby Digital Live and DTS Interactive)

DTS supported natively by Windows 8/8.1 and it should work on windows 10 too just DDL require to unlock your driver .

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

Windows 10 Tweaks

Pressing “Windows+Pause Break” (it’s up there next to scroll lock) opens the “System” Window.

Windows 10: In the new version of Windows, Explorer has a section called Quick Access. This includes your frequent folders and recent files. Explorer defaults to opening this page when you open a new window. If you’d rather open the usual This PC, with links to your drives and library folders, follow these steps:

• Open a new Explorer window.
• Click View in the ribbon.
• Click Options.
• Under General, next to “Open File Explorer to:” choose “This PC.”
• Click OK

credit to Lifehacker.