Windows 10: Windows 10 Intel Wireless ac 9560 dynamic key exchange time out

Almost every time I start the computer, the wifi does not get connected and says the password do not match. I then connect the machine to the same router through ethernet cable and then try to connect the wifi and it succeeds.
After another shut down and power up cycle, this gets repeated.
These are the WLAN application logs from event viewer for the failure cases.


I did try to reset TCP/IP by using the NetShell utility


These are the error logs in sequence:

Log Name: Microsoft-Windows-WLAN-AutoConfig/Operational

Source: Microsoft-Windows-WLAN-AutoConfig

Date: 11/11/2020 10:01:24 PM

Event ID: 11004

Task Category: MsmSecurity

Level: Information

Keywords: 1024,512

User: SYSTEM

Computer: Shahad-ROG

Description:

Wireless security stopped.



Network Adapter: IntelR Wireless-AC 9560 160MHz

Interface GUID: <removed for privacy concern>

Local MAC Address: <removed for privacy concern>

Network SSID: <removed for privacy concern>

BSS Type: Infrastructure

Security Hint: PSK mismatch suspected



Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

<System>

<Provider Name="Microsoft-Windows-WLAN-AutoConfig" Guid="<removed for privacy concern>" />

<EventID>11004</EventID>

<Version>0</Version>

<Level>4</Level>

<Task>24012</Task>

<Opcode>197</Opcode>

<Keywords>0x8000000000000600</Keywords>

<TimeCreated SystemTime="2020-11-11T21:01:24.6905999Z" />

<EventRecordID>1186</EventRecordID>

<Correlation />

<Execution ProcessID="4588" ThreadID="5644" />

<Channel>Microsoft-Windows-WLAN-AutoConfig/Operational</Channel>

<Computer>Shahad-ROG</Computer>

<Security UserID="<removed for privacy concern>" />

</System>

<EventData>

<Data Name="Adapter">IntelR Wireless-AC 9560 160MHz</Data>

<Data Name="DeviceGuid">{<removed for privacy concern>}</Data>

<Data Name="LocalMac"><removed for privacy concern></Data>

<Data Name="SSID"><removed for privacy concern></Data>

<Data Name="BSSType">Infrastructure</Data>

<Data Name="SecurityHint">PSK mismatch suspected</Data>

<Data Name="SecurityHintCode">294932</Data>

<Data Name="ConnectionId">0x4</Data>

</EventData>

</Event>



Log Name: Microsoft-Windows-WLAN-AutoConfig/Operational

Source: Microsoft-Windows-WLAN-AutoConfig

Date: 11/11/2020 10:01:24 PM

Event ID: 11006

Task Category: MsmSecurity

Level: Error

Keywords: 1024,512

User: SYSTEM

Computer: Shahad-ROG

Description:

Wireless security failed.



Network Adapter: IntelR Wireless-AC 9560 160MHz

Interface GUID: {<removed for privacy concern>}

Local MAC Address: <removed for privacy concern>

Network SSID: <removed for privacy concern>

BSS Type: Infrastructure

Peer MAC Address: <removed for privacy concern>

Reason: Dynamic key exchange did not succeed within configured time

Error: 0x0



Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

<System>

<Provider Name="Microsoft-Windows-WLAN-AutoConfig" Guid="{<removed for privacy concern>}" />

<EventID>11006</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>24012</Task>

<Opcode>199</Opcode>

<Keywords>0x8000000000000600</Keywords>

<TimeCreated SystemTime="2020-11-11T21:01:24.1548744Z" />

<EventRecordID>1185</EventRecordID>

<Correlation />

<Execution ProcessID="4588" ThreadID="5644" />

<Channel>Microsoft-Windows-WLAN-AutoConfig/Operational</Channel>

<Computer>Shahad-ROG</Computer>

<Security UserID="<removed for privacy concern>" />

</System>

<EventData>

<Data Name="Adapter">IntelR Wireless-AC 9560 160MHz</Data>

<Data Name="DeviceGuid">{<removed for privacy concern>}</Data>

<Data Name="LocalMac"><removed for privacy concern></Data>

<Data Name="SSID"><removed for privacy concern></Data>

<Data Name="BSSType"><removed for privacy concern></Data>

<Data Name="PeerMac"><removed for privacy concern></Data>

<Data Name="ReasonText">Dynamic key exchange did not succeed within configured time</Data>

<Data Name="ReasonCode">0x48005</Data>

<Data Name="ErrorCode">0x0</Data>

<Data Name="ConnectionId">0x4</Data>

</EventData>

</Event>



Log Name: Microsoft-Windows-WLAN-AutoConfig/Operational

Source: Microsoft-Windows-WLAN-AutoConfig

Date: 11/11/2020 10:01:19 PM

Event ID: 11010

Task Category: MsmSecurity

Level: Information

Keywords: 1024,512

User: SYSTEM

Computer: Shahad-ROG

Description:

Wireless security started.



Network Adapter: IntelR Wireless-AC 9560 160MHz

Interface GUID: {<removed for privacy concern>}

Local MAC Address: <removed for privacy concern>

Network SSID: <removed for privacy concern>

BSS Type: Infrastructure

Authentication: WPA2-Personal

Encryption: AES-CCMP

FIPS Mode: Disabled

802.1x Enabled: No



Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

<System>

<Provider Name="Microsoft-Windows-WLAN-AutoConfig" Guid="{<removed for privacy concern>}" />

<EventID>11010</EventID>

<Version>0</Version>

<Level>4</Level>

<Task>24012</Task>

<Opcode>200</Opcode>

<Keywords>0x8000000000000600</Keywords>

<TimeCreated SystemTime="2020-11-11T21:01:19.1415222Z" />

<EventRecordID>1184</EventRecordID>

<Correlation />

<Execution ProcessID="4588" ThreadID="6176" />

<Channel>Microsoft-Windows-WLAN-AutoConfig/Operational</Channel>

<Computer>Shahad-ROG</Computer>

<Security UserID="<removed for privacy concern>" />

</System>

<EventData>

<Data Name="Adapter">IntelR Wireless-AC 9560 160MHz</Data>

<Data Name="DeviceGuid">{<removed for privacy concern>}</Data>

<Data Name="LocalMac"><removed for privacy concern></Data>

<Data Name="SSID"><removed for privacy concern></Data>

<Data Name="BSSType">Infrastructure</Data>

<Data Name="Auth">WPA2-Personal</Data>

<Data Name="AuthVal">7</Data>

<Data Name="Cipher">AES-CCMP</Data>

<Data Name="CipherVal">4</Data>

<Data Name="FIPSMode">0</Data>

<Data Name="OnexEnabled">0</Data>

<Data Name="ConnectionId">0x4</Data>

</EventData>

</Event>



Log Name: Microsoft-Windows-WLAN-AutoConfig/Operational

Source: Microsoft-Windows-WLAN-AutoConfig

Date: 11/11/2020 10:01:19 PM

Event ID: 11001

Task Category: MsmAssociation

Level: Information

Keywords: 1024,512

User: SYSTEM

Computer: Shahad-ROG

Description:

Wireless network association succeeded.



Network Adapter: IntelR Wireless-AC 9560 160MHz

Interface GUID: {<removed for privacy concern>}

Local MAC Address: <removed for privacy concern>

Network SSID: <removed for privacy concern>

BSS Type: Infrastructure

Management Frame Protection Enabled: 0x400000000



Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

<System>

<Provider Name="Microsoft-Windows-WLAN-AutoConfig" Guid="{<removed for privacy concern>}" />

<EventID>11001</EventID>

<Version>0</Version>

<Level>4</Level>

<Task>24011</Task>

<Opcode>194</Opcode>

<Keywords>0x8000000000000600</Keywords>

<TimeCreated SystemTime="2020-11-11T21:01:19.1415149Z" />

<EventRecordID>1183</EventRecordID>

<Correlation />

<Execution ProcessID="4588" ThreadID="6176" />

<Channel>Microsoft-Windows-WLAN-AutoConfig/Operational</Channel>

<Computer>Shahad-ROG</Computer>

<Security UserID="<removed for privacy concern>" />

</System>

<EventData>

<Data Name="Adapter">IntelR Wireless-AC 9560 160MHz</Data>

<Data Name="DeviceGuid">{<removed for privacy concern>}</Data>

<Data Name="LocalMac"><removed for privacy concern></Data>

<Data Name="SSID"><removed for privacy concern></Data>

<Data Name="BSSType">Infrastructure</Data>

<Data Name="ConnectionId">0x400000000</Data>

<Data Name="MgmtFrameProtection">false</Data>

</EventData>

</Event>

:)

 

Cannot install drivers for Network adapter Intel Wireless-AC 9560.

Cannot install drivers for Network adapter Intel Wireless-AC 9560.

 

Code 10 intel wireless 9560

Hi RadityoPrakoso,

When your computer does not automatically detect your Intel Wireless AC-9560 network adapter, you will need to download the driver update or installer from your manufacturer's website.

If you have a CD installer for your motherboard, you can also use it to install this missing driver for your device.

This resolution is also suggested on this link:
Error codes in Device Manager in Windows.

Go to the "Code 10 "This device cannot start. (Code 10)" section.

Your device originally came from Intel, this means you need to download the driver installer from their official website itself and install it manually (usually, you will see that there is a latest driver already available for download).

Check this link:
https://downloadcenter.intel.com/product/99446/Intel-Wireless-AC-9560.

Once there, select the appropriate operating system if there's a choice like x32 or 64 bit so it will match with your PC.

Let us know if you have successfully installed this driver.

 

Problem with Intel(R) Wireless-AC 9560 160MHz

Hi. I was doing my normal work on the laptop AcerNitro5. In one moment wifi has disconnected. It shows in the device manager that Intel(R) Wireless-AC 9560 160MHz isn't working. I tried updating BIOS,
Acer drivers, intel drivers, etc. I'm desperate. I do not know what else can I do... It happened for the first time.