Windows 10: Windows 10 Pro Cannot Connect to Media on Linksys WRT3200ACM Router

I have a DLNA server residing with my Linksys WRT3200ACM router, purchased a few months ago. Attached is a USB hard drive. It is set to share for all with no passwords so that set top boxes can easily connect to it.


I have several Windows 7 Pro PCs in the building that access this drive for storing backups as well as adding content. It doubles as a NAS.


I have a laptop with Windows 10 Home Ed on it that also can access the drive attached to that router.


My newly-built Windows 10 Pro system cannot. Initially, I learned that I had to enable SMB 1.0 extensions in the "Turn on/off Program Features". That got me one step closer, but I am now encountering a permission problem. I read that was caused by a Policy and learned to change it in the Group Policy Editor to allow "unsecure logons". However, I still can't log onto the media on this router. The result is a "you may not have permission to use this network resource. The remote procedure call failed and did not execute."


The DLNA server does appear under Network Infrastructure, but that only attempts to open a web page unsuccessfully.


This might be related to the fact that this machine cannot see any other machines on this network node. I have tried refreshing the net stack and other suggestions found on the web, but still cannot see Windows 7 PCs. I can access those PCs via \\<IP address> but they don't show up in Network discovery. Browser is enabled and running. Oddly, my Oppo UDP-203 CAN see this Windows 10 PC when it opens the network, but other Windows 7 machines can't see this PC.


Seven days working on solving this and other problems, with no resolution yet.

:)

 

Linksys Introduces the WRT3200ACM Router with Tri-Stream 160 Technology

Linksys today announced the next generation of its one and only WRT router -- the WRT3200ACM. The new Linksys AC3200 WRT Gigabit MU-MIMO Wi-Fi Router features Tri-Stream 160 technology creating the fastest Dual Band router available* and MU-MIMO technology for simultaneous Wi-Fi connections to multiple devices at the same time. It is open-source ready with OpenWrt or DD-WRT for complete flexibility and customization of networking functions or for optimizing the router for specific use cases, such as privacy, VoIP, and small office applications. The newly updated Linksys Smart Wi-Fi app allows users to manage and monitor their home or office Wi-Fi via the cloud from their mobile device, anytime, anywhere.

"We just made the WRT even more powerful, and equipped it with even more features as well as kept true to our word with Open Source support," said Vince La Duca, Linksys product manager. "Linksys WRT is all about making the best router in its class by using all enterprise-grade components and materials while delivering the fastest wireless experience. Our WRT3200ACM now includes MU-MIMO providing the latest AC wave 2 spec, adds DFS certification to use clear Wi-Fi channels for less interference, as well as support for Tri-Stream 160 technology. We have also increased the processor clock speed to 1.8 GHz, added up to 512MB DDR3 flash memory and kept the eSATA and USB ports WRT enthusiasts continue to appreciate."





Linksys offers the largest portfolio of working MU-MIMO solutions including routers and range extenders. The new WRT3200ACM extends the MU-MIMO lineup in a high performance, feature rich solution ideal for homes or small business. MU-MIMO (Multi-User, Multiple-Input, Multiple Output) is the next generation Wi-Fi 802.11ac Wave 2 technology, which helps improve overall performance and efficiency of a Wi-Fi network while providing dedicated bandwidth to MU-MIMO capable client devices as if they have their own dedicated router. With MU-MIMO, the whole household and small office can enjoy 4K and HD TV streaming or other high bandwidth applications to multiple devices all at the same time.

Tri-Stream 160
Almost all of today's current home routers max out at 80 MHz channel width; however, the new WRT3200ACM is Dynamic Frequency Selection (DFS) certified to allow operation at 160 MHz channel width in the 5 GHz band. For example, an AC1900 router uses three streams at 80 MHz channel width. Each stream tops out at 433 Mbps, resulting in a total of 1.3 Gbps. The WRT3200ACM uses three streams at 160 MHz channel width to drive data at 867 Mbps per stream, providing up to 2.6 Gbps - which is up to 2X faster.

Tri-Stream 160 on the WRT3200ACM supports 3 streams at 160MHz each - 867Mbps x 3 = 2.6 Gbps
AC1900 class such as WRT1900ACS uses 3 streams at 80 MHz each - 433Mbps x 3 = 1.3 Gbps

Dynamic Frequency Selection (DFS)
DFS Certification is a Federal Communication Commission (FCC) mandate for radio systems operating in the U-NII-2/U-NII-2 extended 5 GHz band to be able to avoid other radio transmissions considered mission critical, such as military, terminal Doppler weather, or airport radars. DFS certification allows operation at 160MHz channel width and also increases the available channels at 80MHz so the WRT3200ACM can operate in the clearest, uncongested Wi-Fi airspace that other routers aren't allowed. With less congestion or interference, data is able to move faster and more efficient resulting in better overall performance.

The WRT3200ACM is open-source ready for complete flexibility and customization of networking functions or for optimizing the router for specific use cases such as gaming, security, advanced users/IT administrators or for commercial applications:

Gamers:

• Replace the full-featured factory firmware with a stripped down firmware so the router's power is solely directed to moving network traffic instead of running other services like parental control or cloud services.
• Optimize advanced routing settings for low latency

Enhanced browsing privacy/security:

• Build virtual private networks (VPN) for secure data transfers
• Access TOR Networks for anonymous browsing
• Completely strip ad tracking
• Employ network intrusion detection

Networking Professionals

• Create a web server
• Capture and analyze network traffic
• Do Voice over IP calling (VoIP calls)
• Perform advanced network traffic management

Commercial applications:

• Create a Hot Spot (Captive portal) for internet cafes or other retail environments to provide customers with Wi-Fi
• Smaller regional internet service providers looking for custom firmware solutions for CPE routers
• Use the WRT as a Linux-based development platform

Linksys, Marvell and the OpenWrt project have been collaborating to provide full open source support for the WRT3200ACM in OpenWrt's stable and development branches. OpenWrt is a modular system, where users can select and install additional features on top of pre-compiled firmware images from the open source community. This modularity allows networking-savvy users to fully customize the feature set of their router to better suit their particular needs. Some of the recent highlights in OpenWrt include full support for IPv6 networks, better support for multi-core systems in the network stack and enhanced support for 3G/4G modems.

 

Linksys router will not stay connected to the internet

Ok I have a Linksys WRT110 and a Linksys WRT54GS2 and both when I power it up with all connections hooked up, it runs the internet for about 10mins-2 hours then just completely disconnects and will not reconnect. I am using a Netgear WGR614 right now that has a whining capacitor. That router connects and stays connected. Also, the settings for the Linksys routers are not messed with as to the netgears. I am using a wireless ISP. They said its fine to use a router but why isnt my Linksys routers workin? Any Ideas?

 

Linksys router

I just installed a Linksys router and have had nothing but trouble so far. I have a PC laptop with Windows 7 and Linksys is unable to connect to Windows. I have been on with tech support for 3 days now and still do not have the problems solved. Please
help.