Windows 10: Windows 10 recognizes my CF2.0 card as a local drive

I see there's a locked thread from 2017 with only a dozen replies and no actual resolution about this issue but Microsoft has yet to fix this bug. It's a minor annoyance for me, but then I can't just transfer files from removable CF2.0 media to my local server because of it, so it can cost me a lot of time on my work computer because my card reader/CF2.0 card is being recognized as my local "D" server, making my local server inaccessible until I unplug the CF2.0 media. If this has been a known bug for at least 5 years, why hasn't it been fixed? I contacted tech support but they were no help at

:)

 

Windows 10 recognizes my SD Card as a local drive

Jon,

You posted that you would try the suggested steps by Tryx3. May we have an update if the suggested steps have resolved the issue about your SD card being recognized as a fixed drive in Windows 10?

 

Windows 10 recognizes my SD Card as a local drive

Hi Jonathan,

It could be that the SD card is formatted to be recognized as a disk drive instead of a removable disk. May we know if the device is seen as a local drive through Device Manager? If it is, we suggest that you reformat your SD card to NTFS and see if it is
still recognized as a local drive.

Note: Before reformatting a drive, make sure to back up all the files stored in that drive to prevent loss of data.

 

Windows 10 recognizes my SD Card as a local drive

Jon,

I think you are saying that -

1 Disk management does not identify that SD card as removable, and

2 Device manager lists that SD card in its Disk drives entry but not in its
Portable devices entry, and

3 Device manager, Disk drives, {SD card}, Properties, Volumes, Populate identifies that SD card Type as Basic [not as Removable].

I am rather astonished. I thought that this was going to turn into a Refresh issue. I have never heard of anything like your problem before.

I have a few suggestions for action followed by some advice about posting a new question on the topic in both this forum & TenForums [www.tenforums.com - auto-formatting is not working at the moment].

Suggestion 1 -

1.1 Go to Device manager and note the SD card
reader Properties, Driver entry [my SD card reader is within the USB Controllers group but that does not mean yours is].

1.2 Go to the computer maker / SD card reader maker and get their latest Windows 10 driver for the SD card reader and install it.

1.3 Go to Device manager and note the new SD card reader Properties, Driver entry

Suggestion 2 - If you cannot do that then

2.1 Remove the SD card

2.2 If a zombie entry for the SD card remains in Device manager, Disk drives then delete it.

2.3 Go to Device manager and right-click, Uninstall the entry for the SD card reader [mine is within the USB Controllers group but that does not mean yours is].

2.4 Restart the computer straight away [merely to avoid any suspicion that observed symptoms might be left-overs from beforehand].

2.5 Windows will redetect the hardware as it starts. You can force it to by clicking on the Device manager toolbar's Scan for hardware changes icon but that really should not be necessary.

2.6 Go to Device manager and note the new SD card reader Properties, Driver entry

Suggestion 3 - If possible -

As Suggestion 2 but deliberately install the new driver at step 2.5 irrespective of what Windows has installed.

- - - - - - - - - - -

If these suggestions do not fix things then I think you need to post a new question on the subject. That will get you a better response than continuing with this current one.

Title - Device manager & Disk management show removable SD card as a fixed drive.

Description -

1 Disk management does not identify the SD card as removable, and

2 Device manager lists the SD card in its Disk drives entry but not in its
Portable devices entry, and

3 Device manager, Disk drives, {SD card}, Properties, Volumes, Populate identifies the SD card Type as Basic [not as Removable].

4 [describe the effect of the problem - the contents of a previous SD card still being shown]

5 [describe the steps you have already taken to fix things - you can just cut and paste from this thread and then adjust verbiage]

- - - - - - - - - -

When you create your new questions, please paste links to them here so I can follow your progress.

Best of luck,

Denis