Windows 10: Windows 10 recognizes my headphones as speakers, thus not playing stereo audio.

I have an audio interphase where I have my headphones and microphone plugged in. I've had this for a while now and never had any issues. All of the sudden I noticed that my audio had been playing as mono audio for a while. I tested the left and right speaker test in sound settings and found out that windows thinks my headphones plugged in my interface is a speaker. I know its only an issue with the interface since when I plug in the headphones directly to the computer it stereo audio works completely fine. I'm also having regular issues with my mic. It turns off and I have to disable it and disable application access then enable again for it to work. Any help would be greatly appreciated.



Thanks in advance!!

submitted by /u/Own-Worldliness-6167
[link] [comments]

:)

 

Move audio to one side for speakers but not headphones

Hello J1mmyth3F1sh,

Thank you for writing to Microsoft Community Forums.

• Is your headphones getting detected in the Playback settings?
  
• Are you trying to play the audio on both Speakers and Headphones at the same time?
  

Ideally, if you have configured Sound settings to play on your left speakers, the same goes with the headphones. The sound starts playing only on the left side of your headphones according to the settings changed.

Meanwhile, we can try configuring the headphones and change the balance level in the sound settings and see if it works. Kindly check with the steps listed below and see if it helps.

Method : Run audio test for your headphones.

• Open Control Panel from the Start menu and click on
  Sound.
  
• In the Sound window, click on your
  Headphones and select Configure option at the bottom left.
  
• By running the test, check if both sides of your headphones are working fine.
  

If that doesn’t help, I would suggest you to check with the audio balance by following the steps listed below:

• Open Sound settings from
  Control Panel, and right click on the Headphones to open its
  Properties.
  
• Click on Levels tab and select
  Balance button. In the Balance window, you can use the slider to balance both left and right headphones equally.
  

However, I commend and appreciate you for recognizing this behavior. This is a valuable suggestion as there may be other users with a similar requirement. Hence, I suggest you to leave a
Feedback for this product so
that our developer team can look into this and check if it can be implemented in the future updates.

Regards,

Mala S

Microsoft Community - Moderator

 

Headphones recognized as Speakers...

Hi Ahri,

Having your headphones recognized as speaker when plugged in at the back of your PC could be the reason why the audio is low. To help us isolate the problem, we suggest running first the audio troubleshooter from the link Fix
sound problems.

In case the issue persists, then let's remap or retask your Realtek audio jack and see if it addresses the issue. To do that, follow the steps below:

• Open the Realtek HD Audio Manager.
• In the back panel, right click the option where your headphone is connected.
• Choose the option Connector Retasking, then select Headphone.

Feel free to update us with the result so we can further assist you.

Regards.

 

Speaker recognized as headphones.

Hello @auioohi , welcome to tenforums!

Change the name of it, (and the icon, if you wish)