Windows 10: Windows 10 - Restarting computer fails to connect to router. Other devices even other...

First thing in the morning, the computer Acer Aspire A515-56 connects first time every time. However, if I restart or Shutdown & then switch back on my computer it usually refuses to connect to the internet WiFi connection. Network Troubleshooter doesn't find/fix anything, switching WiFi off & on from the "tray" worked once or twice when this problem first emerged, but hasn't worked in months. The only remedy is to switch off & restart the computer again.Every time I shut down the computer in this situation it "hangs" on the shutdown screen for at least 15 minutes I've ne

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Windows 10 update and router issues

Hi Gman,

Welcome to Microsoft Community.

Sorry to know that the Internet connection fails to work on Windows 10. I will certainly help you.

Do you get any error message or error code while connecting to Wireless Router?

You might experience network or Internet connection issues in Windows for a number of reasons. Some common issues that can cause these problems are:

• Corrupted or incompatible drivers.
• Network connection settings.
• Hardware or software problems.
• There's interference from other devices.
• Your router and the network adapter in your PC might not work together.

I suggest you to go through the below article and follow the steps given.

Fix network connection issues

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.

 

Unable connect to WEP Security Router

Hi,



Thank you for posting on Microsoft Community. We regret the inconvenience caused.



Before assisting further, I would like to ask you few questions:

• Do you get any error message when you try to connect to the network?
• Are you able to connect to other devices using similar router?

Method 1: If you are able to connect to other devices using the same router, i suggest you to run the troubleshooters by following the steps below:



Step 1: I suggest you to run the
internet connection troubleshooter by following the steps below and check if the issue is resolved.

• Press Windows icon key on the keyboard, type Troubleshooting and select the top most search result.
• Click on View all from the left side panel of the window.
• Select Internet Connections, click on
  Advanced and check Apply repairs automatically
  option.
• Follow the on screen instructions.

Step 2: Also run the network adapter troubleshooter by following the steps below and check if the issue is resolved.

• Press Windows icon key on the keyboard, type Troubleshooting and select the top most search result.
• Click on View all from the left side panel of the window.
• Select Network Adapter,
  click on Advanced and check Apply repairs automatically
  option.
• Follow the on screen instructions.

Method 2: If the issue persist, I suggest you to
update the network adapter driver from device manager by following the steps below:

• Press Windows key + X keys on the keyboard and click on
  Device Manager.
• Expand the Network adapter driver from the list.
• Right click on the driver and click on Update option.
• Restart the PC to install the network adapters automatically and check if the changes are effective.

Also check from the manufacturer’s website if you are using updated network adapter.



Write back to us with the answers to the above questions for further assistance. Your reply is important for us to ensure we assist you accordingly.



Thank you.