Windows 10: Windows 10 stopped recognizing my secondary raid 0 hard drives

I have 2 x Intel 2tb NVME drives set up in RAID 0 that have been working find for about 6 months. There is about 3.5 tb of data on these drives. Windows 10 File Explorer stopped seeing this drive D: this week. Device manager sees the drives, but I am unable to access the information on them. Everything on my computer is up to date and checks for any updates every time I start up. Some of that I use for school and need it working again ASAP. The CPU is AMD 3950X on a Gigabyte X870 Aorus Master motherboard with 128mb of G.SKILL D4 3200 TRZ RGB RAM. The drives are:


Intel 660p M.2 2280 2TB NVMe PCIe 3.0 x4 3D NAND Internal Solid State Drive SSD SSDPEKNW020T8X1

:)

 

Windows 10 1909 Causes Secondary Hard Drive to not be Recognized

Installing the Windows 10 1909 Update causes my secondary hard drive to not be recognized.

Steps to confirm issue:

• Secondary drive not visible in Windows Explorer
• Secondary drive not visible in device manager
• Secondary drive not visible in disk manager

Steps to replicate issue:

• Installing 1909 update

Steps to resolve issue:

• Uninstall 1909 update

Since updates can only be delayed for so long, an actual fix would be appreciated.

 

Windows 10 Raid 0

Before my Windows 10 Pro 64 Bit Installation, I went into my Motherboard's BIOS and set my two 2TB hard drives in Raid 0 formation. After my Windows 10 Installation, "this computer" sees my "C" drive as only 2TB. Windows 10 should recognize my Raid 0 "C"
drive capacity as 4TB. Why is windows 10 listing my "C" drive as 2TB? Windows 10 should have spanned the Installation across my two hard drives in RAID 0 formation. Did Windows 10 install only onto one hard drive? How can I correct this Windows Installation
to span across my two Seagate SSHD hard drives in RAID 0 formation?

 

Windows 10 not recognizing my secondary raid 0 hard drives

I have tried the troubleshooting feature to trouble shoot hardware and devices. The drives show up in the bios but Windows 10 does not recognize their existence. It was working fine in windows 7. I installed the latest drivers for my MB and have run programs
such as drivethelife to update drivers.

I have a SSD drive as my windows drive. I have two drives set in raid 0 for my main data drives. The raid isn't being recognized by Windows 10.

When I run device manager I believe the raid shows up and says is working properly.

Device SCSI\Disk&Ven_Intel&Prod_Raid_0_Volume\4&4dda929&0&000100 was migrated.

Last Device Instance Id: SCSI\Disk&Ven_Intel&Prod_Raid_0_Volume\4&4dda929&0&000100

Class Guid: {4D36E967-E325-11CE-BFC1-08002BE10318}

Location Path:

Migration Rank: 0x0

Present: true

Anxiously awaiting help.