Windows 10: Windows 10 TCPIP.sys Bug check code 0x109

I've received a BSOD of Critical Structure Corruption from Tcpip.sys:

On Sun 3/7/2021 5:09:33 AM your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\MEMORY.DMP
This was probably caused by the following module: tcpip.sys 0xFFFFF8032B910000
Bugcheck code: 0x109 0xA39FE1E736A0679F, 0xB3B6EE6D89232773, 0xFFFFF8032B910000, 0x2C
Error: CRITICAL_STRUCTURE_CORRUPTION
file path: C:\WINDOWS\system32\drivers\tcpip.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: TCP/IP Driver
Bug check description: This indicates that the kernel has detected critical kernel code or data corruption.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating thermal issue or because of a buggy driver. This problem might also be caused because of overheating thermal issue.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

Any suggestions will be greatly appreciated. I'm going to remove my 2 new sticks of ram and only use the 2 sticks that I know are good, and see if thats the issue.

:)

 

Bug check???? what does this code mean

First!: Download BlueScreenView

Then come back and tell use two (maybe three) things for each dump file:
1) What is the bug check code
2) What is the bug check string (if there is one)
3) What is the highlighted file name

The first two will be at the top pane window and the third will be on the lower pane window. We need all three (or two if no string) for each .dmp listed.

 

BSOD Bug Check Code 0x00000139







Diagnostics Test

Clean boot
Please try the following:

• Open taskmanager
  • Go to the tab startup
  • disable everything
• Search msconfig and open it
  • Go to the tab services
  • Check 'hide microsoft services'
  • Uncheck all other services
  • Click apply and click ok
• Reboot if asked

See if the problem persist, if the problem does not persist enable in the startup tab in taskmanager 1 item and in the services tab in msconfig also 1 service, reboot and see if the problem persist. Keep doing this until you find the culprit or there is nothing left.
If the problem still persist, try booting in safe mode and see if the problem still persist

Please remove the AMD Overdrive driver*
Code:

Code:

Tue Feb 11 12:06:52 2014     AODDriver2.sys  c:\program files\ati technologies\ati.ace\fuel\amd64\aoddriver2.sys

*Move the file to another folder, if any problem occurs move the file back, if no problem occurs remove the file

 

Getting Critical_structure_corruption (tcpip/sys) BSOD on Windows 10 computer

Old title: critical_structure_corruption (tcpip/sys)

Hi,

I keeping getting a random BSOD with "critical_structure_corruption (tcpip/sys)" as the reason. I then have to wait approximately 10 seconds during which time Microsoft are collecting information about the error. This seemed to be introduced after the last
Windows update Tuesday. I couldn't find the cause so did a system restore and all was fine again until the following morning when Microsoft automatically installed the updates again. A rollback doesn't fix the problem now.

When are Microsoft going to fix it for me?

I have got an old-ish motherboard who's latest BIOS update was 2010 so I can't help but think this may be the reason. I've tried everything else.

Any ideas?