Windows 10: Windows 10 update from 1809 to 1903 stuck in 48%

I got a notification in my laptop to update my windows 10 1809 to 1903. Then I proceed to update my windows and after several minutes it ask me to restart the laptop to complete the update. But unfortunately, after 4 hours it stuck in 48% and there is no sign that update process is running.


what should I do? i don’t want get any nightmare anymore like when i update my windows from 1803 to 1809 (at that time it caused BSOD and I need to reinstall windows)


my laptop spesification:

brand: samsung NP370R4V

processor: Intel I5 3210M

memory: 8GB

graphic card: Radeon 8570 & Intel HD 4000

storage: SSD 512GB

:)

 

Intel HD Graphics 4000" blocks me from 1809, will I be able to update to Version 1903?

• Neither Microsoft not Intel has not offered an updated driver for the "Intel HD Graphics 4000" chip.
  
• I am blocked from updating to 1809 because of that, will I be able to update to Version 1903?
• My Gigabyte system board does not offer video drivers for Win 10 64bit. It assumes MS will provide them. Intel has not updated their drivers since 2015.
  

It is system board forever stuck on 1803?

 

Win 10 Pro 64 1809 to 1903 update stuck in endless install loop


bios definitely latest release, which is pretty old, really. Sata 5 & 6 are sacrificed to use 4X on the M.2 slot that sticks out (ie better cooling) and that is fine, disabled them. Tried both windows and latest Samsung NWMe drivers during original failures, am on Windows one atm so will try Samsung when given the verifier overnight to run, no issue yet after 2 hrs. The other two drives are the 200Gb 840 Pro (O and 500Gb 850 Evo (C, both SATA and running fine, apart from the minor errors encountered.

It must be time to go round the 1903 loop again, just to see. But I haven't quite finished off the original task list...

- - - Updated - - -

Went round 1903 loop again, same deal. Have stopped verifier after 18 hrs; couldn't figure out how to make it more aggressive as suggested, but it seems a bit like running MemTest for 4 days and expecting a different result...? It never is!
Finished drive tests, except wasn't going to let Seatools waste hours on the 4Tb drive since chkdsk has done that, pic as follows:




I would try a 1903 media creation tool next but still can't find that - must be a legit Insiders copy somewhere? So will try a repair install of 1809 and see what that gets...

 

Get stuck in booting after update to windows 10 version 1903

hi there:

First, you must be an insider, since 1903 is not out yet to the public. Most likely sometime next month. I suggest you go back to 1809 until 1903 is released to the public.