Windows 10: Windows 10 will not start with USB disk drive connected

Problem:Windows will not start with Seagate external disk drive connected no error message given; it just never completes.Software/hardware:- Windows 10 Pro, 64 bit- External drive causing the problem as given in Device Manager: Seagate One Touch HDD SCSI Disk Drive. Drive capacity is 5 TB, and it is USB.- The drive was originally formatted in ExFAT, but was reformatted to NTFS in order to try to solve the problem. The reformatting made no difference.- RAM: 32 GB- All latest Windows updates are installed.My workaround:1. Start Windows with drive disconnected.2. After logging into Windows:

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Multi-bootable USB

Hey guys from TPU, couldn't find any specific thread pertaining to the question asked on title. As mentioned, I'm trying to create a bootable USB, but with many specifics boots available.

I've been trying to create one with multiple boot device including one that enables me to run Windows 10 directly on the USB Thumb Drive but to no avail.

The list of bootable images i'm trying to create are

1. Windows 10 (A full OS running from thumb drive)
2. Windows 10 ISO (Bootable disk image for fresh install)
3. MemTest86+

Have tried YUMI or UUI from the website USB PenDrive Linux but as this is my first time, i don't know how am i screwing up or am doing it right.. Anyone got a rough idea on a step by step guide? Thanks!

 

My USB Backup drive does not show in My Computer window.

Hi Meran,

A few possible reason can cause your external drive to not show in File Explorer. To diagnose and fix this issue, we suggest that you check the Disk Management window. To open it, follow the steps below:

• Right-click on the Start button.
• Select Disk Management.
• Alternatively, you can search diskmgmt.msc in Cortana.

Examine the list of drives in the Disk Management window and look for your external drive. Even if it doesn’t show up in File Explorer, it should appear here. If the drive appears, it may not be appearing in File Explorer because it needs to be assigned
a drive letter. To do this, right-click the partition on the drive in Disk Management and select
Change Drive Letter and Paths.

If you don’t see the drive in the Disk Management window at all, we suggest that you try connecting the drive to a different USB port or use a different USB cable. We also recommend that you avoid using USB hubs, and connect the drive directly to your computer.

If you need further assistance, please do not hesitate to post a reply.