Windows 10: Windows 10 won't boot

I've seen way more of these machines at my shop lately than I should have to think about. In most cases I can delete the hidden partition, recreate it, recreate the BCD info on it and go. Not this machine. I've checked the HDD and it passes diags. I also ran

chkdsk /r

sfc /scannow


Currently I get boot error 0xc0000001. SRTtrail shows bootres.dll is corrupt after running startup repair. I've tried the bootrec commands and results are as follow


D:\bootrec /fixmbr

The operation completed successfully.


D:\bootrec /fixboot

Access is denied.


D:\bootrec /scanos

. . .

Total identified Windows installations: 0

The operation completed successfully.


D:\bootrec /rebuildbcd

. . .

Total identified Windows installations: 0

The operation completed successfully.


Digging deeper I've found some who recommended messing in the Windows partition (D: in this case from WinRE) at d:\boot, but that directory doesn't exist on this partition.

Example:


attrib d:\boot\bcd -h -r -s

output is

Path not found - D:\boot


I've tried a few other things, but didn't document all of them. I'm totally lost.


So, anyone have pointers for getting this machine to boot?

:)

 

Skype won´t wok in 17063


Skype Won´t work... games won´t work...

Making backup and re-format...

Maybe I Install a Windows 7 again, At least, all of my games run smoothly ...Sadness!!

*Banghead

 

Sabertooth 990fx won't boot to windows logo, it shuts down

to boot and enter bios and load windows, any todays PSU (with the correct plugs) will work, AFAIK

to enter BIOS only low wattage is used.
Then, during boot, the HDD and a bit later the videocard card start to demand juice, then the other devices and periphericals... so the total demand during boot up is incrementing step by step, that's why a failure halfway could indicate a PSU problem....

 

My pc won´t boot Windows 10 from USB/DVD

So I wanted to change from my Windows 10 x32 bits to 64x. I downloaded the Mediacreationtool and used it in both a USB and a DVD. Tried used the usb, the disk and both at the same time but they won´t boot.

I have a P7H55-M motherboard, the BIOS is updated and configured to boot first DVD, second usb and third SATA.

So if someone could help me it´d be great.