Windows 10: Windows 10 won't boot

Hi,

Recently I ran into some issue where my window boot manager is not showing up in the boot menu. I dual boot windows 10 with Pop_OS 20.04 LTS, i have run plenty of different linux OS before but this is the first time I ran into this problem.



https://preview.redd.it/swdj21ydr3k...bp&s=3d2ae5a4a286bf8f8d2b1733fef5d7aeb3fc26e8

The steps that i have tried:

1. Use Window Installation Media to burn the iso onto a USB stick. Boot into the usb > repair windows > advanced options > Startup repairing. Startup repairing did not work all I was greeted with is that the file mbr could not be found
2. Same as Step 1, except this time I launched the command prompt rather than the Startup repairing and entered this: BOOTREC /FIXBOOT. Same thing again, was told that there is no such file
3. Boot into my Pop_OS and install rEFind bootloader, and surprisingly the bootloader has the option to let me boot into window. Although, the windows work now but there is always a message that appears just before it goes into the login screen.

https://preview.redd.it/i4qylp6es3k...bp&s=5b3003766fd43a98d8cc84025f9810981a358584

I am wondering if there is anything else that i can do to fix this?

Thank you.

submitted by /u/yangbigyeet
[link] [comments]

:)

 

Skype won´t wok in 17063

Skype Won´t work... games won´t work...

Making backup and re-format...

Maybe I Install a Windows 7 again, At least, all of my games run smoothly ...Sadness!!

*Banghead

 

Sabertooth 990fx won't boot to windows logo, it shuts down

to boot and enter bios and load windows, any todays PSU (with the correct plugs) will work, AFAIK

to enter BIOS only low wattage is used.
Then, during boot, the HDD and a bit later the videocard card start to demand juice, then the other devices and periphericals... so the total demand during boot up is incrementing step by step, that's why a failure halfway could indicate a PSU problem....

 

My pc won´t boot Windows 10 from USB/DVD

So I wanted to change from my Windows 10 x32 bits to 64x. I downloaded the Mediacreationtool and used it in both a USB and a DVD. Tried used the usb, the disk and both at the same time but they won´t boot.

I have a P7H55-M motherboard, the BIOS is updated and configured to boot first DVD, second usb and third SATA.

So if someone could help me it´d be great.