Windows 10: Windows 10 won't Start Properly - Windows Automatic Repair

Hi! I made changes to my boot through msconfig by changing the number of processors to 8 and max memory. Afterwards it just goes to the Windows Automatic Repair.I've already tried fixing it by following these methods hereFixFix 2I've also tried booting into safe mode and its different variations but still no luck. Through both startup settings and command prompt.I've yet to try booting it with a windows 10 flash drive.

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

Windows 10 - Automatic Repair - boots in 2nd cycle

Hello. This is similiar topic on our forum but now i will explain more brighter.
So last time after i change in my UEFI boot priority from :"UEFI USB KINGSTON" to "P1 SSD SAMSUNG EVO 250 GB" i am getting weird booting problem with Windows 10.







When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click restart then Windows 10 boot fine. So i am needing 2 boots to boot properly to windows.

My disk is on MBR partirion. Is this related to my UEFI/Partitions?



Somebody said to me this:"UEFI booting requires a GPT disk. This is why Windows has to fix itself and only boots in 2nd cycle - as you keep trying to boot UEFI to an MBR disk."



Also i know that UEFI firmware can emulate BIOS functionality (CSM/Legacy) and work with MBR disks just fine. Or i am wrong? And cause is elsewhere?



I am a little confused. Thx for reply. My ssd Samsung Evo 250 GB , rams 2x8gb DDR3 Kingston Hyperx 1600mhz.

 

Windows 10 - Automatic Repair - boots in 2nd cycle

Stop making new threads about the same subject. If you have updated information, post it in the thread you made in the first place.

http://www.techpowerup.com/forums/t...-loop-and-applications-not-responding.219960/

Next time you make a thread about Windows 10 booting twice because of UEFI/MBR issues, I'm banning you for spam.