Windows 10: Windows 11 beeping through bluetooth earbuds

When I connect Bluetooth earbuds to my laptop running Windows 11 and any audio is playing, I hear a beeping.I know it's the Windows 11 system because I have tried two sets of Bluetooth earbuds and I heard beeping through both, and when I use the Volume mixer to set System sounds to 0, the beeping stops. Audio through the laptop speakers, however, does not cause beeping. The beeping is two beeps, higher pitch then lower pitch, every ~5 seconds. I just recently installed the 22H2 update.It's ridiculous. I want to stop it. Please, any suggestions?

:)

 

Tozo T12 Bluetooth earbuds not connecting correctly in Windows 11 Pro version 21H2

Please don't tell me to reset the earbuds I have done it a dozen times already.

Hardware: Processor 11th Gen Intel Core i7-11700T @ 1.4GHz, 32Mb RAM

Bluetooth Qualcomm QCA61x4A driver - running bluetooth HCI 9.0/LMP 9.602 bluetooth version 5

Symptom: Earbuds connect but then sound only plays for 1.5s on the left ear then nothing for 4 seconds then cycle repeats. If I put the right earbud back in the charger the left earbud plays normally.

Now if I do nothing but disconnect the bluetooth and fire up bluetooth on my IPhone 7Plus - i.e., bluetooth v4.2 the earbuds work fine.

The supplier replied "Good to know that your earbuds are working fine on the iPhone. I consulted our development department and thought that the problem may also be related to the compatibility of your computer. We updated the T12 firmware for the listed version of Windows 11 through communication with Microsoft, but not sure if your version of Windows 11 pro will work. You can check with Microsoft's customer service to see if there are any settings that need to be changed for normal use. Your case is very special as we have never had such feedback after updating the Windows 11 firmware"

Any suggestions out there on what the "settings" are that could be causing this issue - it's almost like bluetooth is polling two channels but not sending on one.

 

Connecting Bluetooth Earbuds to my Laptop

Here's how to connect your Bluetooth earbuds to your PC. It's mostly about Bluetooth, rather than Windows. And if you were hoping the process would be simple and obvious ... guess what? It's not.

Bluetooth is actually a wireless network technology, very similar to WiFi. What you have are actually
Bluetooth-enabled earbuds, because they have the ability to connect to a Bluetooth network.

The unique thing about a Bluetooth network is that the network exists only between your Bluetooth-enabled earbuds and the Bluetooth adapter in your computer. That makes a Bluetooth network more secure than a WiFi network, because anyone can join a WiFi network.

Get ready, here we go:

Step #1: Make your Bluetooth devices discoverable: Put your earbuds and your Bluetooth adapter into discovery mode. That's like joining a dating website - you've made yourself discoverable to other people. The instructions that came with your earbuds
should say how to put them into discovery mode. Putting your Bluetooth adapter into discovery mode is a two-part process:

• Go to Start > Settings > Devices > Bluetooth and other devices and add your computer's Bluetooth adapter as a 'device.'

• Once you done this you'll see the control to turn Bluetooth 'on.'

Step #2: Pair your earbuds to the Bluetooth adapter. This is like exchanging contact information with someone on that dating website. Your earbuds and the Bluetooth adapter exchange information, so they don't have to go through the whole setup process every
time you want to you use Bluetooth-enabled earbuds. Once your earbuds are paired, they show up in the list of devices on that same page in the Settings app.

Here's how my Bluetooth-enables earbuds look:





Step #3: The final step is to actually meet the person you found on the dating site. In Bluetooth, as in life, that's called 'connecting.'





Now your earbuds are ready to use.

Of course, there are many gotchas that you might encounter, but let's see how far you get with the above.

 

Cannot pair bluetooth earbuds

I have the following problem. My laptop is ASUS STRIX G731GT with Windows 10 and all drivers installed. When I try to connect my Philips SHB2515 earbuds it stays on connecting and after a minute or two it says "No response from device". My bluetooth chip is made by Intel.

Now let me tell you what i've tried so far.

1. Tried with latest drivers
   
2. Tried with older drivers
   
3. Tried to install fresh Windows 10
   
4. Tried to install fresh Windows 11
   
5. Tried couple of linux distros
   
6. Tried with separate USB bluetooth adapter with Realtek chip in it
   
7. Tried to use troubleshooter to fix bluetooth
   
8. My friend have the same laptop and the same earbuds and he alse cannot connect them to his laptop.
   

The earbuds works fine and connects to:

1. Laptop with Aetheros bluetooth chip
   
2. Laptop with Realtek bluetooth chip
   
3. Any phone
   

I think the problem isn't with the drivers but somewhere else.