Windows 10: Windows 11 boot failure due to Bitlocker

A week after updating to Windows 11, my computer crashed and it will no longer boot. It appears to be a Catch-22 problem with Bitlocker: I can't turn off Bitlocker without starting Windows; I can't boot up because the drive is locked. What can I do?

:)

 

Sabertooth 990fx won't boot to windows logo, it shuts down

to boot and enter bios and load windows, any todays PSU (with the correct plugs) will work, AFAIK

to enter BIOS only low wattage is used.
Then, during boot, the HDD and a bit later the videocard card start to demand juice, then the other devices and periphericals... so the total demand during boot up is incrementing step by step, that's why a failure halfway could indicate a PSU problem....

 

BitLocker on Windows 10

Hi,

Thank you for the response and keeping the status updated.

This could be due to some corruption in the system files, please check the methods below and see if it helps:

Method 1:

I suggest you to start the BitLocker Device Encryption service.

Follow the below steps:

• Press Windows key + R from the Keyboard.
• Type services.msc and hit Enter.
• Search for BitLocker Device Encryption service.
• Double click on BitLocker Device Encryption service and click on
  Start button.
• Click on the dropdown list and set the Startup type to
  Automatic.

Method 2: Please try the steps provided in the given article.

Unlock a BitLocker-protected drive

If the issue persists, follow method 2.

Method 3: Perform SFC scan

I would suggest you to perform SFC scan and check if that helps. The
sfc/scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions. It is a utility in Windows that allows users to scan for corruptions in Windows system files and restore
corrupted files.

Refer the link: Use the System File Checker tool to repair missing or corrupted
system files

Note: Link applies to Windows 10 as well.

More information:
BitLocker Frequently Asked Questions (FAQ)

Let us know the status of the issue. We will be glad to assist you further.

Thank you.

 

Need to turn off Bitlocker to install Windows 10

Hi,

We suggest doing the following steps again to resolve the issue. To complete the procedure, make sure that you have the following information:

• You must be able to provide administrative credentials.
• The drive must be BitLocker-protected.

To suspend BitLocker Drive Encryption on an operating system drive, please follow the steps below:

• Click Start, click Control Panel, click
  System and Security, and then click BitLocker Drive Encryption.
• Click Suspend Protection for the operating system drive.
• A message is displayed, informing you that your data will not be protected while BitLocker is suspended and asking if you want to suspend BitLocker Drive Encryption.
  
• Click Yes to continue and suspend BitLocker on the drive.

Let us know how it goes.