Windows 10: Windows 11 BSOD loop, unable to boot to anything, including USB installation media

Yesterday I ran into a problem with my Windows 11 laptop, the specifications are below:AMD Ryzen 5 5625U CPU16GB of DDR4-3200 RAM 2 x 8GB1TB of SSD storage NVMe m.215.6 inch 1920 x 1080 resolution displayAMD Radeon integrated graphics GPULaptop model: HP 15-EF3017CA https://www.hp.com/ca-en/shop/product.aspx?id=2l7u1ua&opt=abl&sel=ntb#detailedSpecsI was in a discord call with one of my friends, when suddenly, my audio started glitching and making a very weird sound, and my display started to glitch out and artefact all over the place. A couple of seconds later, the whole displa

:)

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks

 

Installation media boots to command prompt

I've just booted from known working install media to see exactly what it does when booting. The sequence of events is...

1. Windows logo on a black screen
2. circling dots appear beneath the logo
3. light blue 'Please wait' screen with circling dots
4. a command prompt window (very briefly)
5. the initial Setup page appears

Do you see steps 1-3? If so, it appears you have stopped at step 4, suggesting that something on the disc cannot be read.

Does the disc boot properly in another machine? If so, try cleaning the laptop's drive lens then try booting from the disc again.

If not, make new install media with Microsoft's Media Creation Tool, either as a bootable USB, on an ISO that you can burn to another disc. At Step 8 in Option One of this tutorial you can choose between making a USB or an ISO.

Download Windows 10 ISO File

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk