Windows 10: Windows 11 display too big for monitor screen

I have a Windows 11 PC using monitor circuitry on its Lenovo motherboard Lenovo M920T. I have a Samsung LS24D330HSX monitor, connected to the PC via a Display Port. The displayed image is "too big" for the monitor, losing about half the top and bottom toolbar ribbons off both top and bottom - similar on vertical sides. It 'seems like' I should be adjusting the scaling to around 95% in the display settings - but I don't have an option any smaller than 100%. Changing the resolution obviously alters things, but no option there resolves the issue. There are no options available on the monit

:)

 

How can I drag a screen display onto an adjoining satellite monitor?

Hi Stewart,

In order for us to assist you dragging a screen to your satellite monitor, you can follow these steps:

• Move the cursor off each of the four screen edges to see if one of them works.
  
• If it does, position the monitors in the Display > Screen Resolution window
  to match the physical placement of the monitors.

In the event that the previous steps failed to work, you can try these:

• In the display settings just swap the
  Display1 and Display2 Monitors.
• Drag the Monitor1 display icon and
  drop it on Monitor2 display icon, this would give you the correct alignment of screens.
  

Don’t hesitate to contact us if you have further inquiries.

 

screen display

Hi William,

It is important that you have the correct screen display and resolution. We suggest that you perform the following steps to reset the monitor settings:

• Boot your computer in
  safe mode.
• Once in safe mode, right-click the desktop > Screen Resolution.
• Change the display settings back to the original configuration.
• Restart your computer.

Feel free to update us on the result.

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter