Windows 10: Windows 11 doesn't boot after enabling RAID on BIOS

I have a new system that came with a single M.2 drive. I installed Windows 11 on it - everything was working fine. I figured I'd install Office and all of my other apps and only later move the drives from my old system to the new one.After a couple of days, when the OS was ready, I moved all of the drives into the new system. Here's a list of drives in addition to the preinstalled M.2 drive that runs the OS:1x WD 3TB HDD1x WD 1TB HDD1x Samsung 1TB SSD2x WD 2TB HDDs - Mirrored to each other using RAID1After physically moving the drives, I enabled RAID in the BIOS which immediately recognized

:)

 

Windows doesn`t start. Authomatic repair doesn`t work.

Thanks again!!

I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

I`ll do it and I`ll be updating this thread when I have the report.

- - - Updated - - -

I ran SeaTools. These are the results:




Does it mean my HDD is useless?

 

hd6950 to hd 6970

ok
i ve tried everything:with atiflash from dos,winflash.step by step with bios powercolor hd 6970 from the database.
nothing,doesn´t work.any suggestion????

 

Windows 10 product key blocked after enabling RAID in bios.

So here is the deal:

I upgraded a PC to windows 10 from 7 this worked fine and 10 was fully activated.

I then did a clean install with media creation tool, this also worked fine and 10 was activated again from the servers.

I then decided I want to enable raid in the bios and add two addtional drives (boot drive is SSD and did not change)

So because it's darn near impossible to get raid working on a existing install I had to clean install again, I really did not think that enabling raid and adding two drives would mess up the stored signature in the activation servers, but it did.

Now the new raid volume is working(not bootable) and windows refuses to activate and says my product key is blocked..and only gives me the option to purchase a new product key.. This is not acceptable.

i didn't add any new major hardware, I just enabled raid in the bios.

Has this happened to anyone else?

Windows 10 was fully activated and I had already done a clean install after the upgrade was completed and activated.

Not sure what I can do at this point? I still have my win7 product key, should I start from scratch at this point?