Windows 10: Windows 11 Multiple BSOD

I have experienced multiple BSOD with my computer. I checked the event log and found this bug code entry:The bugcheck was: 0x0000003b 0x00000000c000001d, 0xfffff80761f60d62, 0xffff8081ccc73900, 0x0000000000000000. A dump was saved in: C:\Windows\Minidump\102923-12515-01.dmp. Report Id: 136813de-24cc-41b7-b16b-58904b18748b.The bugcheck was: 0x00000133 0x0000000000000001, 0x0000000000001e00, 0xfffff80547305330, 0x0000000000000000. A dump was saved in:&nb

:)

 

Multiple BSODs after Windows 11 Installation

After installing Windows 11, I get multiple BSODs each time it tries to boots (logo phase).

I have Windows 10 alongside with it, it is working without any problem.

I installed it bypassing TPM and Secure boot because my PC doesn't support it, since it's an old laptop.

Specifications:

• Asus ROG G74SX
  
• CPU: i7-2670qm (8x2.2ghz)
  
• GPU: GTX 560M
  
• MEM: 2x8GB + 2x2GB DDR3 (1333MHz)
  
• SSD: Kingston 240GB
  
• HDD: Hitachi 700GB
  

So far, these are all the BSODs I tracked:

• SYSTEM THREAD EXCEPTION NOT HANDLED
  
• KERNEL MODE HEAP CORRUPTION
  
• IRQL_NOT_LESS_OR_EQUAL
  
• Kernel Security Check Failure
  
• FAT FILE SYSTEM
  

 

Windows 11 having multiple BSOD a day

I've noticed such a problem since 2 months ago. I've tried to replace my memory sticks. This is then followed by updating firmware and software. I tried to upgrade from Windows 10 to Windows 11 as well. My final step was to reinstall Windows 11. All the steps have been performed but the issue is still happening, in fact much more frequent than before. Below are the errors that I see while BSOD:

• WHEA Uncorrectable Error
  
• DRIVER_IRQL_NOT_LESS_OR_EQUAL
  

I've even run "sfc /scannow" and memory diagnostics, all return normal. I've no idea on what to do now. Hereby providing a .dmp file for your reference under my OneDrive. Link

 

Multiple BSOD

Bug Check 0x1A: MEMORY_MANAGEMENT

Bug Check 0x1A MEMORY_MANAGEMENT - Wing:type

MEMORY_MANAGEMENT BSODs, accompanied by occasional app crashes/GPUTDR.

http://www.tomshardware.com/forum/3...t-bsods-accompanied-occasional-crashes-gputdr

The relevant Parameter appears to be 0x41284 which means, A PTE or the working set list is corrupted, which in itself means nothing to most of us poor Windows users. I still wonder if this is not just bad RAM?

Is it possible to remove one stick of RAM for testing purposes and then test all sticks one at a time (that's is you have multiple sticks of RAM, otherwise it is a daft suggestion on my part).