Windows 10: WIndows 11 new install and USB problem.

I have followed the instructions on the sire to create a media install disc on a USB drive. It seems to create files OK.I then move it to the PC which is totally blank to try the new install.In the BIOS I have set boot to USB first. It finds the USB drive but then displays the following images.Also when I then try to view the USB drive back on my other PC it cant find it at all. How do I recover this USB drive?Thanks

:)

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Installing Windows 11 from a recovery USB on Dell Inspiron 3580

Hi,

Background:

Drive was showing signs of death. Machine had Win 11 installed and updated.

• I created a USB recovery drive as per MS instructions.
  
• I removed the old drive, and added a new SSD drive.
  
• Upon boot Windows Setup launches. I select language, time and currency, and keyboard (all defaults) and click Next.
  
• I click Install Now.
  
• Setup starts.
  
• I respond to the applicable notices and license terms affirmatively and click Next.
  
• I am seeing 2 options: Upgrade which is not available because I am booting with a USB drive. I choose Custome, Install Windows Only. Which is fine by me.
  
• I choose the new drive from the list.
  
• The installation runs from Copying Windows files to Finishing up. All steps are marked complete.
  
• Then the Windows Setup launches again.
  

Dell diagnostics show the new drive is functional, and no other problems were found.

Can anyone please suggest what I might try next/differently, etc.?