Windows 10: Windows 11 screen problems.

We recently turned on the computer to a glitched rainbow down at the bottom, split into two lines, hovering over the start menu. We turned off the computer and turned it back on and it is in fact the computer. I have updated all of the updates needing, so what else could this problem be?

:)

 

Nvidia driver problem with 940 MX on Windows 10 x64

I would only go back to the driver from the computers manufacturers if you experience any issues with the latest drivers from devie manufacturers.

If everything is still working well with the clean boot then you can start troubleshooting as follows to start:

How to determine what is causing the problem after you do a clean boot


1. Log on to the computer by using an account that has administrator rights.
2. From Start, search for msconfig. (In Windows 10, use the Search box from the Start menu. In Windows 8 or 8.1, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.)
3. Select msconfig or System Configuration from the search results.
4. Tap or click the Services tab, and then tap or click to select the Hide all Microsoft services check box.
5. Tap or click to select the upper half of the check boxes in the Service list.
6. Tap or click OK, and then tap or click Restart.
7. After the computer finishes restarting, determine whether the problem still occurs.
• If the problem still occurs, repeat steps 1 through 6, but clear the lower half of the check boxes in the Service list that you originally selected.
• If the problem does not occur, repeat steps 1 through 6, and select only the upper half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem when only one service is selected in the Service list, this means that the selected service causes the problem, and you should go to step 11. If no service causes the problem, go to step 8.
8. Repeat steps 1 and 3 in this section.
9. Tap or click the Startup tab, and then tap or click to select the upper half of the check boxes in the Startup Item list.
10. Click OK, and then click Restart.
• If the problem still occurs, repeat steps 8 and 9, but clear the lower half of the checked boxes in the Startup Item list that you originally selected.
• If the problem does not occur, repeat steps 8 and 9, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem after only one Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the problem, and you should go to step 11. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 1 through 7 without selecting the Hide all Microsoft services check box in each step.
11. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then tap or click to clear the check box for the problem item.
From <How to perform a clean boot in Windows>

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Adobe Flash message in IE 11

Hi Sandra,

To help you out with your concern, we suggest that you disable the add-ons in Internet Explorer 11. For step by step instructions, go to this

link, then look for the title Turning off and removing add-ons.

We also suggest that you reset Internet Explorer 11 through these steps:

• Go to Internet Explorer then click the Gear icon.
• Choose Internet options > Advanced.
• Click Reset.

(Note: If you have added Favorites, back up them first before resetting the browser. )

Should you need further assistance, let us know.

Regards.