Windows 10: Windows 11 selection problem and screen on automatically

Hello,I am using windows 11. If I try to select a file from folder contains many documents the selection always goes to 1st file in the folder. After that I can't scroll down or deselect the 1st file. Same problem with typing also. While typing the cursor automatically moves to the left hand starting position. While browsing the window always goes to the starting position and can't scroll down. Tried to restart and reset but no change. If I leave the lap without shutdown then screen is still on, tried to reduce the sleep time option but no change . Only way to screen off is to shut down manu

:)

 

Nvidia driver problem with 940 MX on Windows 10 x64

I would only go back to the driver from the computers manufacturers if you experience any issues with the latest drivers from devie manufacturers.

If everything is still working well with the clean boot then you can start troubleshooting as follows to start:

How to determine what is causing the problem after you do a clean boot


1. Log on to the computer by using an account that has administrator rights.
2. From Start, search for msconfig. (In Windows 10, use the Search box from the Start menu. In Windows 8 or 8.1, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.)
3. Select msconfig or System Configuration from the search results.
4. Tap or click the Services tab, and then tap or click to select the Hide all Microsoft services check box.
5. Tap or click to select the upper half of the check boxes in the Service list.
6. Tap or click OK, and then tap or click Restart.
7. After the computer finishes restarting, determine whether the problem still occurs.
• If the problem still occurs, repeat steps 1 through 6, but clear the lower half of the check boxes in the Service list that you originally selected.
• If the problem does not occur, repeat steps 1 through 6, and select only the upper half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem when only one service is selected in the Service list, this means that the selected service causes the problem, and you should go to step 11. If no service causes the problem, go to step 8.
8. Repeat steps 1 and 3 in this section.
9. Tap or click the Startup tab, and then tap or click to select the upper half of the check boxes in the Startup Item list.
10. Click OK, and then click Restart.
• If the problem still occurs, repeat steps 8 and 9, but clear the lower half of the checked boxes in the Startup Item list that you originally selected.
• If the problem does not occur, repeat steps 8 and 9, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem after only one Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the problem, and you should go to step 11. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 1 through 7 without selecting the Hide all Microsoft services check box in each step.
11. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then tap or click to clear the check box for the problem item.
From <https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows>

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Stop windows 10 to automatically update to new build 1709 in the background

Since the options are not available in version 1511, we then suggest you to provide a feedback about this using our Feedback Hub app. This will help our developers to acknowledge your concern and provide resolution
for these options to be available in version 1511. To do this, simply refer to the steps below:

• Select Add
  new feedback
  next to the search bar.
• Tell us whether you’re sending a problem or suggestion.
• In the Summarize your issue
  box, provide a concise but clear title for your problem or suggestion.
• In the Give us more detail (optional)box, you can give us more specific
  information, like how you encountered the problem.
• Select a category that corresponds to your feedback. For example, if your printer stopped working, you’d select
  Hardware, Devices, and Drivers.
• Select a subcategory—like
  Print
  for problems with printing.
• (Optional) Step through the problem while capturing the steps so we can see what happened.

• Select Recreate the problem (recommended).
• Select the type of problem you’re
  having, and select
  Start capture.
• Do the steps that led to the problem.
• When you’ve completed the steps, select
  Stop capture.

8. (Optional) Send a screenshot to help show the problem.

9. Go to where the problem happened, press the
Windows logo key
+ Print screen
to take a picture of your screen.

10. Select Attach a screenshot, go to the Pictures/Screenshots folder,
select the screenshot you want to send, and then press Enter.

11. When you’re satisfied with your feedback, select
Submit.

Keep us updated.