Windows 10: Windows 11 update bricked my desktop and I cannot access anything

Ever since updating windows 11, it has completely bricked my system and I have no access into it. The monitor doesn't boot up with either HDMI or Displayport, my mouse doesn't connect, my keyboard doesn't connect, my hard drives and thumbdrives don't connect to it, and I cannot even access the recovery tools to reset it. What the heck am I supposed to do and why would Windows put out a update that PURPOSELY destroys people's machines. I have a HP Omen 45L and I already had to send it out once to get it fixed so what the heck am I supposed to do now?

:)

 

Laptops cannot access desktops via WIFI

I have 3 desktops (all on Windows 10 1803) connected on my LAN. After following this forum for some times and did all the steps as suggested by forum member, access denied, all my desktops are able to view and access one another. I have a printer connected to PC1, and managed to connect all the other 2 PCs to have the shared printer.

I also have 2 more laptops (both Asus with the same Windows 10 1803) connected via WIFI. Performed all the same steps as per the desktops, but I was not able to access PC1. I was able to view all the 3 desktops from the file explorer, but I just can't access all the desktops. However, I was able to access the Asus laptops from desktop PC1.

Anyone able to assist on this matter? Any assistance is highly appreciated.

 

Quick Access bar

Hi,

Thank you for posting your query in Microsoft Community.

We would be glad to help you with the issue you are facing today. I understand the difficulty.

Remove items from Quick access.

I would suggest you to follow the below steps.

• Right click on the file or folder.
• Select the option “unpin from the quick access”

To pin items to an item already on the quick access bar.

Follow the below steps.

I would suggest you to create folder in the desktop screen & place all the files or folder which need to pin to the quick access.

• Open the quick access.
• Select the Desktop option.
• Right click on the folder & select the option “pin to quick access”

Hope this helps in resolving the issue. If the issue persists, do get back to us. We will be happy to assist you.



Thank you.

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.