Windows 10: Windows 11 won’t boot, not from USB or even open recovery. Recovery Error Code 0xc0000001.

Hello,I have tried everything I have seen on the internet. All that I did was take the SSD I have in my laptop out and put it back in. Now it cannot boot or anything past the manufacturer logo.I have tried all three format types of USBs containing windows 11 installation media. I have configured the BIOS so that it is #1 boot priority and when it gets past the manufacturer logo replacement for windows logo it is black and nothing. I have tried turning off my computer 3 times. both normally and ‘hard’ resets. I have tried unplugging the battery internally and holding the power button. And i

:)

 

Windows will not boot, Error code 0xc0000001

I am having some issues booting up my desk top. I have not run this computer for about 2 years and am trying to get it running again. As far as I'm aware I have Windows 8 Pro installed onto the Hard Drive, I have the install CD and the key at hand. On the
boot up screen when the Windows logo pops up it just freezes as well as the loading dots. I get the error code 0xc0000001 and I cannot get Windows Recovery to open up whether by the 3 reset method or by the F11 option on the boot screen. I have downloaded
Windows 8.1 on a usb and attempted to boot from it but no luck. Anyone have any suggestions on what the issue might be?

Thank You.

 

Recovery Error code: 0xc0000001

I cant do nothing with my PC. The message said :

"Your PC/Device needs to be repaired

The Boot configuration Data for your PC is missing or contains errors.

File:\EFI\MICROSOFT\BOOT\BCD

Error code: 0xc0000001

You'll need recovery tools. If you dont have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.

Press the Windows key for UEFI Firmware settings"

I dowload the tools form https://www.microsoft.com/en-us/software-download/windows10 on my USB drive.

The problem is the way to repairer my computer dosent work (no black screen, no recovery message or clock).

Nothing sems to work, exept the Windows key to access UEFI.

My Device information is: (its an IRULU W10 Tablette/PC)

"Intel (R) Atom (TM) CPU z3735F @ 1.33GHz

CPU Signature 30678

Microcode Patch 82a

Max CPU Speed 1330 MHz

Min CPU speed 500 MHz

Processor Cores 4

Intel HT technology Not supported

Intel VT-x Technology Supported

L1 Date Cache 24 KB x 4

L1 Code Cache 32 KB x 4

L2 Cache 1024 KBx 2

L3 Cache Not present"

What sould I do? i need help

 

How does Windows boot to advanced recovery option e.g. command prompt?

- that gives me a 454 'Unexpected error' This tells me that the BCD is partially corrupted.

The commands: shutdown.exe /r /o /f /t 00
or: %SystemRoot%\System32\Cmd.exe /c reagentc /boottore&shutdown /r /f /t 00
should boot into Recovery if everything is configured correctly.
FYI, If Windows is configured correctly:

1. If Reagentc is disabled, you still can get into Recovery but with limited options.
2. If Reagentc is enabled, you'll get all options.
3. If you boot Windows using Recovery USB stick, You'll get into Recovery with couple of options missing.

Here's my suggestion if you want to try:
OPTION 1: Will save the trouble of re-install Windows.

1. Download the image of my first 3 partitions (450MB Recovery, 100 MB EFI partition, and 16MB unformatted primary)
   EFI_Boot-00-00.7z - Google Drive
2. Run Macrium and restore the image from step 1, overwriting your existing 1st three partitions, leaving C alone.
3. Delete the 490MB Recovery partition.
4. From Macrium, run fix boot problems.
5. Reboot. Open Admin command prompt then run Reagentc /info to make sure that it is enabled. If not, enable it.
   if failed to enable, reboot and try again.

OPTION 2: Assuming you've already had Windows backup with Macrium.

1. Wipe out the first 5 parttiions. (450MB, 100MB, 16MB, C Drive, 480MB)
2. Fresh install Windows 10
3. Restore C drive from backup image, run fix boot problems
4. repeat step 5 from OPTION 1 above.