Windows 10: Windows 7 Upgrade to 10 Error 0xc004f213

I had windows 7 active and running well. I upgraded to windows 10 from

https://www.microsoft.com/en-us/software-download/windows10


Now it gives me error on activating windows 10 - Error 0xc004f213


all my licenses are legally purchased and i maintain vlsc account.



what should i do to solve this issue.


regards

:)

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

Windows 10 upgrade problem, no input accepted

i've seen this when the stock USB drivers went kaput. Only ever seen it once - i used a PCI USB 2.0 card and connected the mouse and keyboard to that, and manually updated the USB 2/USB 3 drivers.

 

Upgrade Windows 7 to 10 Error 0x8007001f



The partition layout of disk 0 (shown as disk 1 in Partition Manager) is non standard and was customized by the manufacturer. A normal Win 7 installation will have a layout:

1. 100MB System Reserved, NTFS format and marked as Active
2. C drive.

A normal Windows 10 installation will have:

1. 550MB Reserved partition, NTFS format and marked as Active
2. C drive.

Since you know how to use Minitool Partition Manager. Suggest to use it:

1. Create a bootable installation USB from the Windows ISO using: Rufus - Create bootable USB drives the easy way
2. Delete the 1st 2 partitions (102MB, 15GB) then create a 550MB partition, format as NTFS, label "System Reserved", assign a letter R, mark as Active
3. Move C drive next to the newly created 550MB. should look like the screen shot below, note H: drive should be C: in your case:
   
   
   
4. Boot up the USB created in step 1, on the first screen, press SHIFT+F10 to open the Admin command prompt then type:
   bcdboot C:\Windows /s R: /f BIOS =====> This will create the BCD to boot Windows and store in R: (550MB partition)
5. Reboot the PC then try to upgrade again

NOTE: It is advisable to create a backup image of the whole disk 0, just in case anything goes wrong then you can restore back before making any modification.
To create a backup image Use:
Macrium Reflect Free Edition x64
Macrium Reflect Free Edition x86