Windows 10: Windows blue screening with 2 sticks of ram installed, works with 1 in any slot and both...

Hello I get BSOD's when trying to boot into windows with multiple BSOD messages too many to name but they often mention memory. However when I reach the recovery screen this error message is important to note: “Windows could not load because a required file is missing or contains errors”File: \windows\system32\winload.exe. Error code: 0xc0000225I googled the error code and it mentions that a required device may not be properly connected such as an SSD, I am almost certain my drives are fine so im not really sure what to do. Before I posted here I tried the following: resetting windows, u

:)

 

DIMM slot 1, 3 or DIMM slot 2, 4?


Page 1-23 in the manual;

1. (2) Supports two (2) modules inserted into either the red slots or the black slots as onepair of Dual-channel memory con guration. We suggest that you install the modulesinto slots A2 and B2 for better compatibility.
   

 

Task manager say 1 out of 2 slots in RAM.

Hi William,

I'm Rodrigo and I will help you.

This slot information means that your device supports 2 slots to install RAM and you are using only 1 of them, it supports 1 more slot to install RAM, but more information is needed to be sure that this slot is available on your device.

 

All 4 RAM sticks working but on motherboard 2nd 4th slot don't work.

Hi Guys!

It worked!
What I did was.

1. I cleans RAM slots on motherboard with brush....., there happened to be some spongy dust particle stuck in 2nd slot.
2. I just shuffled the RAM sticks, put the third one in second slot.



Thats it. It worked! All 4 Sticks 32GB working now!

Thanks for your time and suggestions!