Windows 10: Windows blue screens after switching to ahci mode

I would get a messag every time i opened my pc "ssd found running at ide mode do you want to eneble ahci mode" when i clicked yes the pc restarted and every time it trys to startup it shows this bsod. I eventually switched back to ide and window had to repair its self. Is there something i can do to fix the ahci mode ? https://drive.google.com/file/d/1SyOnNrOY_91EreyzUyKCRPGzF35LILFC/view?usp=drivesdk

:)

 

Changing IDE to AHCI Mode

Hi guys, I thought i might put this up for people that also might have missed this setting to get AHCI mode working on your motherboard.

A mate of mine decided to look into it and found a Windows Vista/7 fix so you can enable AHCI mode in your BIOS without the system blue screening, like it does for most computers that are already set on IDE mode.

Now most of you guys might already knows this but I didn't and all my computers where set on IDE mode and when I would change it to AHCI it would just crash when booting so I just thought oh well it don't work and never bothered with it again. But it seems if you set AHCI mode BEFORE installing Windows you wont have this issue, but if you did not set it before then running this Fix will fix your problem *Smile

Ok run this Fix > Error message occurs after you change the SATA mode of the boot drive - Microsoft Support then go to your BIOS, change your settings from IDE mode to AHCI mode, save and exit, boot into Windows, it will then install all the drivers that you need for this Mode. Once its finished it will ask you to reboot, reboot and your done *Smile

Made a big difference for me in boot times and file transfer times, everything sped up alot.

*Toast :toast:

 

Blue Screen - Unexpected Kernal mode trap

Hi Anne,

Thank you for writing to Microsoft Community forum.

This issue may occur when your computer lacks sufficient kernel space to process kernel-mode drivers

To have a better clarity on the issue and guide you accordingly, respond to the questions listed below.

1. What is the make and model of the PC?
   
2. Were there any changes made on the computer prior to this issue?
   

Meanwhile, you may try the troubleshooting steps suggested in the articles listed below and check if it works:

1. Troubleshoot blue screen errors.
   
2. Troubleshoot UNEXPECTED_KERNEL_MODE_TRAP
   
3. Bug check: UNEXPECTED_ KERNEL_ MODE_ TRAP
   

Regards,

 

Startup Blue Screen

Hi Jon,

Startup blue screen error(s) can occur if a problem causes your PC to shut down or restart unexpectedly. It could be due to the following:

• Outdated device software drivers
• Corrupted Windows update system files
• Software/Security conflicts

We would like to know some information:

• Did you get any blue screen stop error codes?
• Have you tried booting in Safe mode?

We suggest that you check this
article about troubleshooting blue screen errors and follow the troubleshooting steps provided there.

We will wait for your response