Windows 10: Windows boot manager won't run through new SSD

Hi,I recently got a new SSD and I used a USB to install Windows onto it. Windows seems to have installed successfully but I cannot use my SSD as the boot drive.In the BIOS I am forced to use Windows Boot ManagerMy Hard drive, which then prompts me to choose which OS I want to use: the Windows installed on my SSD or the Windows installed on my hard drive.If I start my PC with the hard drive disconnected I get a "Reboot and select proper boot device" error.How can I move the boot manager to the SSD so that I can wipe my hard drive?Will I have to reinstall windows again?Thanks,Rob.

:)

 

New windows 10 installtion on New SSD - wont boot unless old SSD present

It seems you installed Windows while the both SSDs were connected. This would have caused your current problem. Maybe it is sufficient to do this:

1. Launch the Disk Manager.
2. Right-click drive C:, then mark it as "active".
3. Shut down Windows
4. Open the BIOS and tell it that the new SSD is the primary boot device.
5. Disconnect the old SSD.
6. Boot up normally.

If this does not work then you might have to do this:

1. Disconnect the old SSD.
2. Re-install Windows on the new SSD, using the Media Creation Tool.

 

Skype won´t wok in 17063

Skype Won´t work... games won´t work...

Making backup and re-format...

Maybe I Install a Windows 7 again, At least, all of my games run smoothly ...Sadness!!

*Banghead

 

windows won't boot from ssd

computer is now booting im still missing a drive or partition tho, its in my device manager and in bios. currently i have C: wich is my ssd i have e: which is my 500gb hdd im missing D: which is my 1tb drive and i also have an F: which says system reserve 100mb ive never had that before

i used the easeus program listed above and it found the partition, it needs to be formatted how do i go about formatting a drive that i wont be installing an OS on...bootdisk?