Windows 10: Windows booting problem

I own a hp compaq 8200 elite sff desktop pc with windows 10 installed. When i boot the pc after 3-4 hours first a black screen comes with a fix underscore and after approximately 15-20 seconds i get windows boot manager error 0xc0000102 the boot configuration data for your pc is missing or contains errors . If i power it off and then again on immediately it boots normally. Then again this problem occurs when the pc is left off for 3 or 4 hours. But if i restart immediately it boots normally. The pc is booting through windows boot manager. What is the problem. I am not able to figure it out. what should be done as i cant find the fault.

:)

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.