Windows 10: Windows bsod boot loop

Please calm down a bit, it isn't an easy task to troubleshoot sometimes and in your case many possibilities won't work as you say.

That I understand of the problem, no possibility will improve anything.

 

Ok I know where that battery is I was wondering what that was now I know. Oh believe me I know oh to well about static discharge seeing how I fried my first mobo trying to push a loose cable in. I had to get new one, will NEVER make that mistake again. Im VERY SORRY if I sound flustered I sunk almost $2,000 in this build. I feel like I bit off more then I can chew here. Once again im sorry about that I am just trying to give u as much info as possible here is all. I will disconnect the cmos and let u know what happens.

 

According to your manual you can also reset your Bios to defaults this way:
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
●
●Go to BIOS and press F6 to load optimized defaults.
●
●Short the Clear CMOS jumper on the motherboard.
●
●Press the Clear CMOS button, on the rear I/O panel. (Only for the motherboard
with clear CMOS button.)


First try
Safe mode with command prompt

 

Ok I tried safe mode with command prompt and it just goes to blue screen with the message your pc ran into a problem and needs to restart error 0xc0000021a
Each time it restarts i get a different error but these are all the ones I get.
critical process died
Error system pet misuses
Bad configuration

I will try to remove the battery now. After I do that what should I do?

 

Try any troubleshooting option if you get the error again.

SYSTEM_PTE_MISUSE is caused by device drivers

I think you mean bad_system_config_info?

 

So on boot this is what I get it list the processor and all my drives
Detected ata/Atapi devices
Sata port1 sandisk
Sata port2 ssd
all settings were reset to default values
press f1 to run setup
Press f2 to continue

What should I select?

 

Are you rebooting with the windows install USBdisk

 

I donkey know I have it plugged into my usb drive is thst what I should be doing. All I have done is removed the battery then turn it back on. I have a black screen with those two options. Would taking pictures and posting them help any?

 

To get it clear , you replaced the Cmos battery and now restarted your Pc.

Choice F2 option if you are lucky you can back in windowsOS.

Important: if you inserted the windows usbstick remove it else it probably will try to acces from the usbstick.

 

So this is what I got when I took out the. Battery and hit continue I got the bsod message your pc needs to be repaired there is an invalid object in the boot configuration data store error 0xc0000034
You need to use recovery tools press escape for ueif firmware settings.

Now how do I configure my bios ro boot only that usb stick and nothing else? Or would tgat not fix this issue.

 

Well now I can get the Microsoft window loader to come up but it just gives me the hour glass symbol and nothing more been like this for 5 minutes now. Question if I had say a windows 8 version would I be able to just load that instead or would I have the same issue's?

 

What is exactly the problem
You can now boot into the USBstick but it won't load into windows installation/repair screen?
Then the usb stick is broken or the windows installation is corrupt.
Do you have a other windows installation disc or installation USBstick
I believe you can also use a other windows installation disc/stick like windows 8 or 8.1 to get in the repair modus.

 

Holly crap something worked I now have the windows setup screen. With 2 choices repair or install now which should I choose???

 

Now I have the choose an option screen like u said along time ago.

I have continue
Use a device
Troubleshoot
Turn off pc
What should I select

 

Reset this pc or advanced options. Sorry to go step by step with u bit it has been 3 straight days of this blue screen nonsense so I am afraid to do anything else.