Windows 10: Windows bsod boot loop

PLease stop doing all kind of stuff on your Pc.
Because honestly i am confused what you have done or are doing.
You are (re)setting your bios into legacy and then back to uefi and restarting your pc in between etc.
What is your specific problem at the moment.
You give no answers to questions. As did you use the reset to reinstall your windows again or the refresh or did you do a clean reinstall etc.

 

I just wanted to say thanks i finally was able to repair my pc. She works now I just followed the command prompt directions and it worked like a charm. I really appreciate all the help you gave me. Fingers crossed I wont run into that problem again, although at least now I know how to fix it. A million thanks my friend.

 

So scratch that last message computer ran fine for about 30 minutes then it started doing the bsod all over again. So my question is could this be a bad windows copy or is this a system thing like my motherboard or cpu thats faulty?

 

What was the system doing in this 30 minutes did it install Windows Updates.
Did you install a program or update any drivers.

Please use the BSOD posting instruction to provide theDumpfile BSOD - Posting Instructions - Windows 10 Forums
And fill in your System Specs.

 

so in those 30 minutes I downloaded the following my MSi mobo drivers, nivida graphics card drivers, google chrome, uttorent, corsair drivers for water cooler. These were the same programs I downloaded the first go around when I got it to work for 30 minutes, the only thing I didn't download this time was my windows updates. Now I did read a bunch of posts last night referring to some 3 party programs that might cause serious problems for windows 10 but I don' know how true that is? I am going to try and give it one more go this morning after that I am either bringing it to a repair shop or returning the whole thing for a pre-built. Question I asked you before was do you think this can be a corrupted version of windows or a corrupted motherboard?
This is what I did step for step yesterday when I got it to work

Removed the cmos battery to reset mobo to default
inserted usb recovery to my usb 2.0 drive
bios confirmed I was running in legacy+ueif (didn't change anything)
changed boot order to usb windows recovery to boot 1st
restarted computer
I opened boot manager up in safe mode with command prompt
choose option to install windows 7
typed in product key
format OS on ssd to start fresh
Installed new windows on ssd
install successful
computer restarted and upon restart immediatly crashed to bsod 0xc0000021a
rebooted back to safe mode with command prompt
choose option to repair computer followed steps to get to command prompt
followed tutorial on how to repair efi bootloader
repaired successful
disconnected usb recovery
restarted cpu
windows crashed once but on the next restart I was greeted with normal windows setup.
system was working for around 30-60 minutes before it crashed to bsod
This is as far as I got I shut it off because I was so disgusted with the thing.

Sorry for the trouble

 

Question I followed the exact same steps as I already mention above and I got it to work BUT as soon as I try to restart the computer it boots up with a message saying disk scan in progress press any key to stop. If I dont stop it it crashes to bsod with error code 0xc000001 or 0xc000021a. If i stop it I get a screen giving me the option to setup windows 10 or system recovery. After a few minutes I get the normal windows loading screen where I am able to sign in as normal with Windows booting up. But there are issues with some of my programs not working correctly. I was not able to load my graphics card drivers, keep getting a 7zip error stating installation failed. My Google chrome browser would not always work it kept crashing. The whole system just does not want to run correctly. Therefore how do I determine if this is a bad windows version, bad mobo, bad ssd or cpu? Side note when I did my original install I had a loose fan header coming off my 1st mobo so I pushed it in while the computer was running. There was a tiny spark and my sytem immediately shut down. I was unable to get the motherboard to work so I purchased my current one. This one worked but could that initial spark have damaged any other of my components namely my cpu or ssd cards?

 

Could you load up the dumpfiles.
Please use the BSOD posting instruction to provide theDumpfile BSOD - Posting Instructions - Windows 10 Forums
And fill in your System Specs.

Also other components could be damaged by shortcircuiting your motherboard.
What SSD are you using. Did you get a Cd with a SSD test program.
Could you Test your SSD for errors.
Because you only install windows and with a restart directly get a windows error. So it could be that the SSd is faulty and your windows OS gets corrupted during install.
Also if your system starts it is automaticaly starting to scan Disc( SSD)

How are you installing windows with a clean install or?
Are you using windows safe mode for installing?

 

Sorry but I finally got the computer to work long enough to generate the bug report as asked I just hope it doesn't crash while I am sending this out, fingers crossed.

 

I hope this helps I have narrowed my list of possible corrupt components down to just 3 its either windows, motherboard or cpu. I have a brand new ssd that I am using which windows is installed on and a brand new graphics card and psu therefore it has to be one of the 3 I mentioned. I can get the system to work sort of it still crashes all the time but once and awhile it will work for 10-30 minutes and just crash. Every time I try to log onto the internet it will immediately crash I will also get strange messages that pop stating my spyware has been shut off when I never turned it off. I am not able to update any drivers at all system just crashes. I am weighting taking it to get repaired and let them fix this headache but at the same time if it is just a problem with windows that can be fixed with a new one why bother. I will wait till see what you have to say since you have been very helpful.

 

All 3 dumpfiles are
Code: Loading User Symbols ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff8019c11e967, ffffd00076d26d80, 0} Probably caused by : ntkrnlmp.exe ( nt!RtlSidHashInitialize+57 ) Followup: MachineOwner --------- 6: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff8019c11e967, Address of the instruction which caused the bugcheck Arg3: ffffd00076d26d80, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. STACK_TEXT: ffffd000`76d277a0 fffff801`9c51d06e : ffffc001`8509f060 00000000`00000000 ffffc001`8509f002 00000000`00000000 : nt!RtlSidHashInitialize+0x57 ffffd000`76d277d0 fffff801`9c533283 : ffffd000`76d27a80 ffffc001`78c08060 ffffd000`76d27a00 00000000`00000001 : nt!SepDuplicateToken+0x54e ffffd000`76d27890 fffff801`9c532f15 : ffffe001`8d9cd840 00000000`02000000 0000beac`00000a01 00000000`00000000 : nt!NtOpenThreadTokenEx+0x363 ffffd000`76d279c0 fffff801`9c1e6263 : ffffe001`8d9cd840 000000b7`ef646ae0 ffffe001`8d9cd840 ffffc001`864a6350 : nt!NtOpenThreadToken+0x11 ffffd000`76d27a00 00007ffa`4ea5378a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 000000b7`f08fe548 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffa`4ea5378a[/quote] I think that the source of your problem is Windows OS or possible a (boot)virus.

Your system has no older drivers at all but all your windows 10 files are around july 2015.
What version of windows 10 are you using is this some kind of Beta version?
Where did you get this version from?
Is this version downloaded from Microsoft?

I would download the latest windows 10 version from Microsoft use this tutorial https://www.tenforums.com/tutorials/2...dows-10-a.html
and do a clean install with this version and quickformat the SSD.

 

Nope I bought it from b&h brand new cost me $120.00. When I start up my computer its weird I get a screen that says choose your operating system. Then I have 3 choices windows 10 volume 5 Windows 10 system recovery. Then its says choose your default in 3 seconds. After 3 seconds load i get the normal start screen. Also I installed windows in safe mode that was unfortunately the only way to get it to work.

Do u think a brand new copy would solve my issues as well as the boot virus. Or do I need to fix it another way?

 

Then you have a legit copy and buying a other brand new version would be useless.

But the problem is that you have a corrupted Windows install or maybe 2 installs hence

This could also point to this from the dumpfile analyse nt!SepDuplicateToken+0x54e and nt!RtlSidHashInitialize.
I have not really expertice in this matter but her some info

This could be why your windows is corrupted, because when you are in safemode there is already a existing windowsOS
And normally you never install a OS in safemode.

The windows OS you bought brand new is this a DVD or USBstick or??

Make a completely new clean windows 10 install in the normal way (not in safemode)

First concentrate on the windows OS and set the possibility of a (boot)virus first aside.

 

No dvd it was a usb flash drive that I ordered online. So basically I should remove window reset my sytem with factory restore then try putting a fresh install on my computer

 

To be clear this is a Retail windows 10 USBflash drive. If yes
Just boot up with USBflashdrive and install windows 10(clean) from the installationscreen and use (quick) format the SSD

 

Yes this is a retail version. I will attempt that and let u know if I had any success.