Windows 10: Windows constant blue screen while installed on new SSD

Let me start with the beginning. Yesterday my pc was having problems. It was stuck on “welcome loading screen” I kept persisting and it finally worked. Because this wasn’t the first time I had problems and the SSD I was using was on 52 precent health and I had a new one I just decided to reinstall windows and reset everything. While installing windows, after I formatted and deleted the partitions, I realised that I didn’t know which one is which, because they all had the same amount of storage besides the old Ssd. No panic I unplugged the sata cable for the HDD’s, found the SSD and installed windows. While trying to install apps drivers softwares etc the pc blue screened and it put me in bios where there were noBOOT overrides, which is very weird. Tried to exit with save and exit but put me in bios again so I had to manually close the pc and fortunately enough the pc booted normally. The problem kept happening so I switched the sata cable for the SSD reinstalled windows twice with different usb and the problem became worse. Right now I just decided to reinstall windows again on the old ssd and I have no problems whatsoever.

I also want to indicate the following: SSD has not had any problems while I’m gaming on it and I also installed Linux on it and worked perfectly fine. Whenever I got the blue screen it restarted so fast that I could only take 3 pics of 2 different errors. 2 of them had the “Critical process died” and the last one had “inaccessible boot device”.

submitted by /u/GoldenGunter
[link] [comments]

:)

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

Blue Screen

Hi,





Blue screens could be caused by problems with your computer’s hardware or with its driver. Still, we
would like to know more about the issue. Please clarify the following:

• Did you get a STOP code?
• Did you install any hardware or driver recently?

For basic troubleshooting steps to resolve blue screen errors, we suggest checking out this
article and simply follow the steps.



Feel free to contact us if you need further help.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??