Windows 10: windows could not start the remote access connection manager serivce on local computer....

I have been dealing with above erorr in my windows 10 laptop.It refused to connect dial up connections can you help:windows could not start the remote access connection manager serivce on local computer. error20: windows could not find the device specified

:)

 

Cannot get Remote Access Connection Manager to start.

Hi,

It appears that the following services are failing to start.

• Remote Access Connection Manager service
  
• Secure Socket Tunneling Protocol Service
  
• Network List Service
  
• DHCP Client
  
• Network Location Awareness
  
• Network Connection Broker
  
• WinHTTP Web Proxy Auto-Discovery Service
  
• IP Helper
  
• Connected Devices Platform Service
  

Most of them depend upon DHCP, which is failing to start. Also, the NordVPN service crashes every 15 minutes.

Try:

1) Network Reset (Instructions)

2) Reset your firewall configuration. (Instructions)

If that doesn't help, repair Windows 10 using an in-place upgrade. How to perform an In-place Upgrade with Windows 10 Step-by-Step Guide - Microsoft Community.

 

Remote access connection manager will not start in Windows 8.1

When in Services under "services and applications" I am trying to get the " Remote Access Connection Manager" to start, and after some 30 seconds, the message "error 20: cannot find the device specified"message appears. I assume that the device "remote
access connection manager" (RASMAN) either does not exist or is corrupt. Can anybody help me with this? My ultimate goal is to initialize the program "Hide,me.exe" a VPN service. This program worked fine with no problems running Windows 8. When I upgraded
to Windows 8.1 the program did not work anymore. I have uninstalled,and reinstalled the program, I have followed all the instructions I was given by starting the hide,me service, then restarting the computer and it still fails. At this time I was fortunate
enough to get a Microsoft chat respondent to "take control" of my computer. He did a few changes and then had me run a memory check program after hitting "restart". All these efforts were in vain. I am still in a wondering mode at this point. Can you suggest
anything that might help? Thank you, and I appreciate any and all suggestions that may come my way. Thank anyone in advance...

 

Remote Access Connection Manager

Hi Robin,



Thank you for posting your query in Microsoft Community.

Thank you for your interest in Windows 10.

I can understand, how frustrating it can be, when things don’t work as expected.

I'd be glad to help you.

Try to follow these methods, mentioned below to fix your issue.

Method 1:

Enable the disabled services and start the services.

To enable the disabled services and start the services:

a. Click on Windows key + R, then type services.msc in the Run command Window.

b. Select Services in the Programs list. If you are prompted for an administrator password or confirmation, type your password or click Continue

c. Right-click Remote Access Connection Manager service and then click Properties.

d. On the General tab, click Manual next to Startup type.

e. On the General tab, click Start under Service status, and then click OK.

f. Also check for the Dependency services.

The following are the dependency services of "Remote Access Connection Manager":

i. Secure Socket Tunneling Protocol Service

ii. Telephony

iii. Plug and Play

iv. Remote Procedure Call (RPC)

v. DCOM Server Process Launcher

vi. RPC Endpoint Mapper

Make sure the above services are started in the services list. If not, start all of the above services and check, if it helps you.

If the issue persists, follow the method 2.

Method 2:

Uninstall and reinstall the Network adapter’s drivers.

Step 1:

Try to update the Network adapter drivers for the device.

To do this, follow these steps, mentioned below:

1. In Device Manager, click the Network adapter drivers tab in the device's Properties dialog box.

2. Click Update Driver of Network adapter to start the Hardware Update Wizard.

3. Follow the instructions to update the Network adapter drivers.

Step 2:

If the issue persists, this issue occur due to the Network adapter driver may not be compatible.

I suggest you download the latest Network adapter driver from the manufacturer’s website and check, if it works.

If the issue still persist, I suggest you to install the Network driver in compatibility mode and check, if it works.



Follow the steps to install the drivers in compatibility mode.

1. Download the latest Network adapter driver from the manufacturer’s website.

2. Right-click on the setup file and click on "Properties".

3. Click on the ‘compatibility’ tab and check the box "Run this program in compatibility mode” and select previous Operating System from the drop down.

4. Click on ‘Apply’ and click ‘OK’ and run the file to install it.

I would like you to post your query with TechNet for the issue regarding "Secure Socket Tunneling Protocol Service" for better resolution

Technet forums



Your reply is very important for us to ensure a proper resolution. Please get back to us with the updated information in order to assist you accordingly.

Thank you.