Windows 10: Windows disabling and enabling all my audio devices

I recently reset my computer, and now after re-installing everything my audio devices are in a permanent loop of getting disabled and enabled whether it be a Bluetooth speaker system or a wired headset

:)

 

Re-enable audio device

Hi,

I would be happy to assist you.

Before we proceed with troubleshooting, I would need little information on the issue.

• Are using speakers / head phones to listen to audio?

If you have disabled the audio device, then you might not see it under the list of playback devices. I would suggest you to follow these steps to make sure you see the disabled devices:

• • 
    Open
    Control panel.
    
  • 
    Click Hardware and Sound and then Click on
    Sounds.
    
  • 
    Under Playback tab, right click on the empty area and make sure
    “Show Disabled Devices” has a check mark on it. If headphones/Speakers are disabled, it will now show up in the list.
    
  • 
    Right click on the device and
    Enable it. Click OK.
    

If the issue still persists, try enabling speakers automatically using steps below.

• 
  Go to Settings> Click on themes> Advance sound settings> right click on the speakers or the audio device youo have connected > click on
  Configure device.
  
• 
  Test the sound level you want, click Next.
  
• 
  And configure the audio devices.
  

Hope this helps you. Do reply if you need further assistance on Windows 10.

Thank you.

 

Disabled motherboard audio device disappears from sound configuration

Win 10 on a Gigabyte Z170X mobo. This board has Creative Soundblaster audio as well as the Intel chipset audio that goes out HDMI cable. Both were working but at some point the system sent some audio to the monitor instead of the Creative device which goes
to external speakers.

So I selected "disable" on the two Intel audio devices (one for HDMI, one for display miniport). Instead of appearing "disabled" they simply disappeared from the sound configuration list. They remain in the Devices list and are listed as "enabled". But
since they are no longer listed in the Control Panel sound configuration settings, I can't turn them back on. Rebooting made no difference: still listed as enabled devices, but still not present in Control Panel sound settings.

I'd like to get the Intel devices back so I have the option of using them. Any suggestions please?

Thanks very much.

 

Disable audio device on ATI Radeon 4850 (Asus EAH4850)

Thanks for the suggestion! But sadly this doesn't work.

I already tried that and I still get the odd crash. I'm pretty sure it's because of the underlying IRQ conflict.

Back in the good old days you used to be able to disable VGA IRQs in the BIOS, no such setting any more.

If ATI/AMD just gave you the option to turn HDMI off the problem would go away *Frown