Windows 10: Windows doesnt see 2 new SSD for installation

Hi, so i built a budget PC, R5 3600, Asrock b450m, Rx 5700xt, 1tb kingstone ssd and 16gb ram, on stick 2133 other 2400.I build it at a friend and when we finished he used a random USB with pirated windows to install, it went great everything 10/10 just no normal updates.I brought it home, plugged in and the windows did not boot up, i tryed everything but nothing works.Tryed to install new windows, nothing; tryed shift+f10, diskpart clean and create partition primary, nothing; tryed original windows 10/11 with media toolkit, nothing; tryed original win10/11 with rufus both gpt and mbr, nothing;

:)

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

Issues with installation of new MSATA SSD

Yes it was a clean install on a new SSD. The laptop boots into windows fine. As mentioned in the earlier posts I'm trying to get the BIOS to see the new SSD as UEFI and not Legacy as it originally did when I installed the SSD and installed windows. I changed it from MBR to GPT from the windows installation screen and have since followed the steps above to allocate the drive an EFI partition, the drive itself still isn't seen under UEFI boot options in the BIOS itself though and I'd imagine it may be the final steps listed that may resolve this but for it doesn't want to allow it. I'm happy to post pictures, could you be a bit more specific as to what you'd like me to post. Thanks Daniel

 

Win10 clean install on Samsung SSD 850 EVO

BLUF: SSD is not listed ubder "Where do you want to install Windows?"

Steps Complete:

1. I've create a Win10 bootable install usb.

2. I connect the new Samsung SSD 850 EVO via SATA.

3. I reboot PC and verify SSD is seen by the motherboard/BIOS

4. Begin Win10 install via usb.

5. Get to "Where do you want to install Windows?" and the SSD is not listed

Problems:

1. Samsung does not offer a driver for the 850 on their website

2. Cannot locate driver elsewhere

Unsuccessful Mitigations Steps Attempt:

A. Format & partition SSD via Windows Disk Management, then retried steps 1-5 above....same result

B. Clone existing HHD onto SSD via "Image for Windows" by TeraByte, then verified SSD contents via Windows Explorer....similar result

Can you please offer some advice on locating a driver for a Samsung SSD 850 EVO 1TB drive? Or an alternative method?

Thank you