Windows 10: Windows Hello sticks to laptop camera in Windows 11

I have an HP laptop Elitebook with a Windows Hello capable camera. This laptop sits in an HP ultra thin dock most of the time, connecting to two extra screens. On top of one screen I have placed a Logitech Brio 4K camera, which is also Windows Hello capable, that is plugged into the dock. so not integrated into the extra screenSituation:I turn on my laptop cold boot when the laptop is already in the dock. The Logitech camera lets me log in through Windows Hello.During the course of the day, I have to unplug from the dock to use just my laptop. Sometimes the laptop needs to be locked, so

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

Elecom Windows Hello Face Camera

1. Run a Windows Update to check for any drivers from Microsoft. If any are available, install them, then proceed to Step 3
   
2. Check the Elecom site directly for driver downloads. If there is a driver available, install it. If not, proceed to Step 3
   
3. Reboot your PC with the webcam connected
   

If the webcam still isn't detected on as a Windows Hello camera, try the above steps on a different PC to make sure the webcam itself works. I had a similar problem with the Mouse CM02-A on my work laptop today. Works just fine on 1 of my personal desktops. Strangely enough, the Logitech BRIO works just fine on the same work laptop the Mouse failed on.

My guess is the work laptop's group policy blocked the Mouse's driver or something like that.